Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Looking for Extruder Stepper Motor
#1
I apologize if this is not the right place for this but I am looking for an extruder stepper motor for 1.0, anyone have one they are willing to sell?

Here is what happened to mine, I was trying to remove the gear and like a dummy I didnt flip the motor on its side or upside down so it slid toward the body. I was not able to heat it up enough so I kept at it, I figured it was a lost cause but I kept on with it.

https://www.youtube.com/watch?v=Fw99k8NXMno
Reply
#2
This is the exact stepper motor used in my 1.0A.... 17PM-K406-11V
http://www.eminebea.com/en/product/rotar...pm-k.shtml

I have replaced it with one with a bit more torque, and have the original one, but they are easy to find on eBay or Amazon. You need a NEMA 17 size stepper with 1.8° steps. If you do not also replace the drivers, you should look for something with a 1.4A rating on the coils. 

If you still want a used one, mine is available I suppose.

<edit> I am pretty sure I have the gear thing too (knobbed bolt is not right, not sure what it is actually called.)
Reply
#3
(04-22-2016, 11:30 PM)Menneset Wrote: This is the exact stepper motor used in my 1.0A....  17PM-K406-11V
http://www.eminebea.com/en/product/rotar...pm-k.shtml

I have replaced it with one with a bit more torque, and have the original one, but they are easy to find on eBay or Amazon. You need a NEMA 17 size stepper with 1.8° steps. If you do not also replace the drivers, you should look for something with a 1.4A rating on the coils. 

If you still want a used one, mine is available I suppose.

<edit> I am pretty sure I have the gear thing too (knobbed bolt is not right, not sure what it is actually called.)

I have read that the 1.0, as opposed to 1.0A, uses 1A and the part number is different 17PM-K142BG01-CN. I also have drivers that I can upgrade, would I have to upgrade all of them or just the one?
Reply
#4
Just the one.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)