Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1.0 main board upgrade to 1.0A? Possible?
#1
After trying to eliminate a 0013 error for months. Swapping out parts , flashing, changing to repetier etc, I believe my issue resides on the main board. (Bn resistors look ok)Since trying to buy a 1.0 (1.1.j)is near impossible I am wondering if dropping a 1.0A main board would be possible? What connection mods are required etc.
Thanks
Reply
#2
(03-25-2016, 09:36 AM)imagecatcher Wrote: After trying to eliminate a 0013 error for months. Swapping out parts , flashing, changing to repetier etc, I believe my issue resides on the main board. (Bn resistors look ok)Since trying to buy a 1.0 (1.1.j)is near impossible I am wondering if dropping a 1.0A main board would be possible? What connection mods are required etc.
Thanks

if memory serves me correctly the chassy for the 1.0, and 1.0A are the same. As far as connectors go I'm unsure, but I don't see why not considering they have all the same hardware.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)