Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
USB Device Not recognized....
#1
I am trying to Flash the Firmware on my Davinci 1.0A.  I have jumpered J37 and now when I try to identify the USB Port, I get a USB Device Not Recognized Error and when I look at my device manager, I see Unknown USB Device (Device Descriptor Request Failed).  With no USB Assignment referenced.  I have tried this on three different computers....

I am BRICKED!!!

Any Help, PLEASE???

-Sal-
Reply
#2
https://github.com/luc-github/Repetier-Firmware-0.92/
Reply
#3
Thank you for that feedback, but I can not find any information regarding what to do if I get a USB Device Not Recognized.

Any help?

-Sal-
Reply
#4
you have to write it that drivers have seen you port. I will not tell you what it was because the driver forgot. See the google
Reply
#5
Right, but earlier it had read "Bossa Programming Port (Com6)....

Now USB Device Unrecognized.

Where in the Google are you referring to, please?
Reply
#6
https://github.com/luc-github/Repetier-F.../issues/13

maybe it will help
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)