Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Extruder/Bed wont heat up
#1
I hacked by Da Vinci 1.0 yesterday and I still can't seem to get it to print. Ive adjusted all of the slicer setting and g code as recommended from the forums posts. The problem occurs when I try to print, the extruder and bed do not heat up. I can heat them up from the printer, and I can also heat them up in slicer by unchecked the red slash marks for the extruder and bed. The problem occurs when I click print in slicer, either the temperature continuously goes down, or the temperature does nothing.

Heres a video [video]https://www.youtube.com/watch?v=-i0qZUltPqk[/video]
Reply
#2
Gcode

Start:
M140 S[first_layer_bed_temperature] ; Bed (no wait)
M106 S255 ; Start fan
G90 ; set absolute coordinates
G28 ; home all axis
M190 S[first_layer_bed_temperature] ; Bed (wait)
M104 S[first_layer_temperature] ; Extruder (no wait)
M109 S[first_layer_temperature] ; Extruder (wait)
M117 Start
M117 Cleaning
M100 ; Cleaning
M117 Printing

End:
M117 Done
G92 E0 ; reset extrusion distance
G1 E-3 F600 ; Retract
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 X-33 Y-12 ; home x & y
G1 Z100 ; Lower bed
M117 Down Bed
M100 ; Cleaning
M117 Cleaning
G28 X-33 Y-12 ; home x & y
M84 ; Disable motors
M117 Remove Print
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)