Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Da Vinci 1.0A - Repetier - Simplify3D
#1
Has anyone successfully printed with a Da Vinci 1.0A, with Repetier 0.92 Firmware, and Simplify3D Software?
Reply
#2
Yes. What is it that you're having problem with?
Reply
#3
I actually got it working. But thank you!
Reply
#4
I have a Davinci 1.0 with repetier 0.91 firmware and can't for the life of me get it to connect to the s3d software any help will be greatly appreciated
Reply
#5
Tools/hardware config - Communications
Uncheck the box "wait for startup commands".
Set the right budrate.

Well. I have another problem. Just flashed my printer, got it connected.

When I start a print, the printer heats up.. Printing with PLA for the first time, well, second but the first time it didnt go well with stock firmware.

After the printer is heated up, the extruder moves to the starting point, but then, nothing. It wont start print =/

I can preheat the printer and start a sampleprint from the menu on the printer, works fine, but from S3d I cant get it to work =/
Any ideas?
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)