Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Every layer slides to the left
#1
I am using a Davinci 1.0 running Repatier. It used to print no problems and then it started shifting layers to the left. Now I can't print anything at all. Every time I start a print the first layer is fine then the next layers consistently shift to the left. Please help any suggestions will be appreciated.
Reply
#2
I had a similar issue and it was because the glass on the heated bed was moving. Had to shim it in the front and on the sides to stop it. I'm not sure that is your issue but I would check it to be safe. I haven't had any issues with repetier. Knock on wood.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)