Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
tray config
#1
hello
when the parts is completed the tray remains at the top of the printer?
configured to how it goes down after finish the job?
meci

me printer davinci 1.0 repetied firmware
Reply
#2
you need to custom your End GCODE, have several examples on the forum
Reply
#3
i have code to simplify3d

start

end

M103 ; turn off extruder and retraction
M104 S0 ; turn off extruder
M140 S0 ; turn off bed
M107 ; turn off fan
M127 ; turn off valve
M84 ; disable motors
Reply
#4
https://forum.voltivo.com/showthread.php?tid=8739

https://forum.voltivo.com/showthread.php?tid=8522
Reply
#5
i love you LUC Smile i am no gay ! love to help me ....
Reply
#6
search function is powerful on this forum
Reply
#7
hello Luc,

the plateau drops to 0 when the work is complete ...
extudeur and the heating plate does not begin at the same time?

thank you

code

G21 ;metric values
M82 ;set extruder to absolute mode
G28 ; Home extruder
M117 Heating...
M116 ; wait all temperatures ready
G90 ; set absolute coordinates
M117 Start
M117 Cleaning
M100 ; Cleaning
G1 Z5 F1500
G1 X0 Y15 F1000
G1 X4 Y30 F1000
G92 E0 ; reset extrusion distance
M117 Printing

M104 S0 ; turn off extruder
G90 ; Absolute
G28 X0 Y0 ; home
M117 Down Bed
G1 Z200 ; Lower bed
M117 Cleaning
M100 ;Cleaning
M117 Cooling
M190 S50 ; Bed (cooling and wait for stabilize)
M140 S0 ; turn off Bed
M117 Pickup piece
M84 ; Disable motors
M117 Printer Ready
















[Image: 01sm.jpg][Image: 02sm.jpg][Image: 03sm.jpg][Image: 04sm.jpg][Image: 05sm.jpg][Image: 06sm.jpg][Image: 07sm.jpg][Image: 08sm.jpg]
Reply
#8
continue image






[Image: 09sm.jpg][Image: 10sm.jpg][Image: 11sm.jpg]
Reply
#9
Quote:extudeur and the heating plate does not begin at the same time?
nope if you check "wait for temperature controler to stabilize before begining build" it will wait bed to stabilize then will heat extruder, which is not necessary as you already added M116 in start GCODE which do same.

I suggest you to choose "save toolpath to disk" of your model in S3D and open the gcode file to understand the process and the commands

this file explain all available commands : https://github.com/luc-github/Repetier-F...petier.ino

also playing with fan (cooking tab) in S3D is useless for Davinci, unless you setup a second fan, extruder fan is not manageable by M107/M106 commands
Reply
#10
I turn around for two hours Sad Blush

my code

M116 ; wait all temperatures ready
G21 ;metric values
M82 ;set extruder to absolute mode
G28 ; Home extruder
M117 Heating...
G90 ; set absolute coordinates
M117 Start
M117 Cleaning
M100 ; Cleaning
G1 Z5 F1500
G1 X0 Y15 F1000
G1 X4 Y30 F1000
G92 E0 ; reset extrusion distance
M117 Printing

print image







OK OK my code syntax error !

M116 ; wait all temperatures ready no good espace ; :oops:
this good M116;wait all temperatures ready[Image: 0001.jpg][Image: 0002.jpg]
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)