Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Extruder not heating
#1
Brand new DaVinci, I just installed Repetier.92 from LUC github,.and using Repetier Host. Everything worked before the firmware change from XYZ to Repetier.

I can preheat the nozzle from the machine, but when I start print in repetier host the hot end wont heat up. Bed heats up fine.

Everything else seems to work.

----------------------
Code:
# generated by Slic3r 1.1.7 on Thu Mar 12 20:26:37 2015
avoid_crossing_perimeters = 0
bed_size = 200,200
bed_temperature = 100
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 10
brim_width = 2
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors\n
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 0.91
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 30
filament_diameter = 1.75
fill_angle = 45
fill_density = 40%
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_bed_temperature = 105
first_layer_extrusion_width = 200%
first_layer_height = 0.3
first_layer_speed = 30%
first_layer_temperature = 225
g0 = 0
gap_fill_speed = 10
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 60
interface_shells = 0
layer_gcode =
layer_height = 0.2
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
min_skirt_length = 10
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 40
perimeters = 2
post_process =
print_center = 100,100
raft_layers = 1
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1.5
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 15
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 70%
solid_fill_pattern = rectilinear
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 75%
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle\n
support_material = 1
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 2
support_material_interface_spacing = 0
support_material_interface_speed = 75%
support_material_pattern = rectilinear
support_material_spacing = 4
support_material_speed = 20
support_material_threshold = 30
temperature = 225
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 50%
top_solid_layers = 3
travel_speed = 125
use_firmware_retraction = 0
use_relative_e_distances = 0
vibration_limit = 0
wipe = 0
z_offset = 0


eeprom
Code:
BaudrateDisplay Mode:Light On:Keep Light On:Filament Sensor On:Top Sensor On:Sound On:Filament printed [m]Printer active [s]Max. inactive time [ms,0=off]Stop stepper after inactivity [ms,0=off]Powersave after [ms,0=off]:Temp Ext PLA:Temp Ext ABS:Temp Bed PLA:Temp Bed ABS:X-axis steps per mmY-axis steps per mmZ-axis steps per mmX-axis max. feedrate [mm/s]Y-axis max. feedrate [mm/s]Z-axis max. feedrate [mm/s]X-axis homing feedrate [mm/s]Y-axis homing feedrate [mm/s]Z-axis homing feedrate [mm/s]Max. jerk [mm/s]Max. Z-jerk [mm/s]X home pos [mm]Y home pos [mm]Z home pos [mm]X max length [mm]Y max length [mm]Z max length [mm]X backlash [mm]Y backlash [mm]Z backlash [mm]X-axis acceleration [mm/s^2]Y-axis acceleration [mm/s^2]Z-axis acceleration [mm/s^2]X-axis travel acceleration [mm/s^2]Y-axis travel acceleration [mm/s^2]Z-axis travel acceleration [mm/s^2]Manual-probe X1Manual-probe Y1Manual-probe X2Manual-probe Y2Manual-probe X3Manual-probe Y3Manual-probe X4Manual-probe Y4Z-probe height [mm]Max. z-probe - bed dist. [mm]Z-probe speed [mm/s]Z-probe x-y-speed [mm/s]Z-probe offset x [mm]Z-probe offset y [mm]Z-probe X1Z-probe Y1Z-probe X2Z-probe Y2Z-probe X3Z-probe Y3Autolevel active (1/0)Bed Heat Manager [0-3]Bed PID drive maxBed PID drive minBed PID P-gainBed PID I-gainBed PID D-gainBed PID max value [0-255]Extr.1 steps per mmExtr.1 max. feedrate [mm/s]Extr.1 start feedrate [mm/s]Extr.1 acceleration [mm/s^2]Extr.1 heat manager [0-3]Extr.1 PID drive maxExtr.1 PID drive minExtr.1 PID P-gain/dead-timeExtr.1 PID I-gainExtr.1 PID D-gainExtr.1 PID max value [0-255]Extr.1 X-offset [steps]Extr.1 Y-offset [steps]Extr.1 temp. stabilize time [s]Extr.1 temp. for retraction when heating [C]Extr.1 distance to retract when heating [mm]Extr.1 extruder cooler speed [0-255]Extr.1 advance L [0=off]
Reply
#2
If heating from printer or from host using manual tab it means it is slicer issue
what is the code generated by your slicer ?
you have 1.0 or 2.0 ?
Reply
#3
ehh, I dont know what you mean.
Reply
#4
you do not know if you have a 1.0 or 2.0 ?
or you do not know what GCODE is generated by your slicer ?
Reply
#5
Oh, Davinci 1.0. used to have 1.1.I firmware

[code]; generated by Slic3r 1.1.7 on 2015-03-12 at 20:56:55

; perimeters extrusion width = 0.40mm
; infill extrusion width = 0.67mm
; solid infill extrusion width = 0.67mm
; top infill extrusion width = 0.67mm
; support material extrusion width = 0.40mm

G21 ; set units to millimeters
M107
M190 S105 ; wait for bed temperature to be reached
M104 S225 ; set temperature
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle

M109 S225 ; wait for temperature to be reached
G90 ; use absolute coordinates
G92 E0
M82 ; use absolute distances for extrusion
G1 F900.000 E-1.50000
G92 E0
G1 Z0.300 F7500.000
G1 X69.983 Y70.778 F7500.000
G1 E1.50000 F900.000
G1 X71.733 Y69.315 E1.64426 F360.000
G1 X75.000 Y68.443 E1.85806
G1 X125.000 Y68.443 E5.01950
G1 X127.247 Y68.840 E5.16376
G1 X129.222 Y69.983 E5.30802 F360.000
G1 X130.685 Y71.733 E5.45228
G1 X131.557 Y75.000 E5.66609
G1 X131.557 Y125.000 E8.82752
G1 X131.160 Y127.247 E8.97178
G1 X130.017 Y129.222 E9.11604
G1 X128.267 Y130.685 E9.26030
G1 X125.000 Y131.557 E9.47411
G1 X75.000 Y131.557 E12.63554
G1 X72.753 Y131.160 E12.77980
G1 X70.778 Y130.017 E12.92406
G1 X69.315 Y128.267 E13.06833
G1 X68.443 Y125.000 E13.28213
G1 X68.443 Y75.000 E16.44356
G1 X68.840 Y72.753 E16.58782
G1 X69.953 Y70.830 E16.72829
G1 F900.000 E15.22829
G92 E0
G1 X73.617 Y74.413 F7500.000
G1 E1.50000 F900.000
G1 X74.423 Y73.607 E1.57205 F360.000
G1 X125.577 Y73.607 E4.80644
G1 X126.393 Y74.423 E4.87939
G1 X126.393 Y91.042 E5.93015 F360.000
G1 X126.067 Y91.654 E5.97403
G1 X124.948 Y92.410 E6.05939
G1 X124.948 Y93.001 E6.09676
G1 X126.393 Y93.982 E6.20720
G1 X126.393 Y125.577 E8.20487
G1 X125.577 Y126.393 E8.27782
G1 X74.423 Y126.393 E11.51220
G1 X73.607 Y125.577 E11.58515
G1 X73.607 Y74.469 E14.81664
G1 F900.000 E13.31664
G92 E0
G1 X117.992 Y92.710 F7500.000
G1 E1.50000 F900.000
G1 X118.700 Y93.752 E1.57967 F360.000
G1 X118.911 Y93.985 E1.59951
G1 X119.231 Y94.203 E1.62402
G1 X119.624 Y94.333 E1.65018
G1 X120.648 Y94.478 E1.71559
G1 X121.766 Y94.492 E1.78626
G1 X122.527 Y94.441 E1.83453
G1 X123.554 Y94.273 E1.90028
G1 X124.548 Y93.999 E1.96549
G1 X125.103 Y93.780 E2.00323
G1 X125.836 Y94.278 E2.05920
G1 X125.836 Y125.346 E4.02362
G1 X125.346 Y125.836 E4.06739
G1 X74.654 Y125.836 E7.27260
G1 X74.164 Y125.346 E7.31637
G1 X74.164 Y74.654 E10.52157
G1 X74.654 Y74.164 E10.56534
G1 X125.346 Y74.164 E13.77054
G1 X125.836 Y74.654 E13.81431
G1 X125.836 Y90.903 E14.84171
G1 X125.640 Y91.271 E14.86804
G1 X123.518 Y92.704 E15.03000
G1 X122.297 Y93.249 E15.11449
G1 X122.185 Y93.281 E15.12187
G1 X121.559 Y93.367 E15.16181
G1 X121.444 Y93.367 E15.16909
G1 X120.750 Y93.259 E15.21351
G1 X120.558 Y93.186 E15.22649
G1 X120.313 Y93.048 E15.24428
G1 X119.554 Y92.692 E15.29725
G1 X118.662 Y92.058 E15.36647
G1 X118.035 Y92.668 E15.42180
G1 F900.000 E13.92180
G92 E0
G1 X115.278 Y92.372 F7500.000
G1 E1.50000 F900.000
G1 X114.824 Y93.138 E1.55631 F360.000
G1 X114.329 Y93.889 E1.61318
G1 X114.099 Y94.094 E1.63268
G1 X113.779 Y94.131 E1.65301
G1 X113.088 Y93.801 E1.70145
G1 X112.758 Y93.591 E1.72618
G1 X112.790 Y92.948 E1.76691
G1 X113.216 Y92.726 E1.79732
G1 X114.633 Y91.760 E1.90576
G1 X115.235 Y92.331 E1.95819
G1 F900.000 E0.45819
G92 E0
G1 X114.013 Y94.752 F7500.000
G1 E1.50000 F900.000
G1 X114.244 Y94.692 E1.51515 F360.000
G1 X114.750 Y94.266 E1.55692
G1 X115.288 Y93.447 E1.61892
G1 X115.622 Y92.885 E1.66026
G1 X116.090 Y92.380 E1.70379
G1 X116.151 Y92.344 E1.70826
G1 X116.459 Y92.253 E1.72856
G1 X116.532 Y92.252 E1.73320
G1 X116.882 Y92.348 E1.75614
G1 X116.969 Y92.411 E1.76297
G1 X117.398 Y92.833 E1.80096
G1 X118.269 Y94.108 E1.89861
G1 X118.540 Y94.406 E1.92409
G1 X118.915 Y94.674 E1.95322
G1 X119.441 Y94.864 E1.98859
G1 X120.568 Y95.032 E2.06066
G1 X121.804 Y95.049 E2.13882
G1 X122.613 Y94.992 E2.19005
G1 X123.645 Y94.824 E2.25620
G1 X124.726 Y94.528 E2.32705
G1 X125.034 Y94.407 E2.34800
G1 X125.279 Y94.573 E2.36666
G1 X125.279 Y125.115 E4.29784
G1 X125.115 Y125.279 E4.31243
G1 X74.885 Y125.279 E7.48845
G1 X74.721 Y125.115 E7.50304
G1 X74.721 Y74.885 E10.67906
G1 X74.885 Y74.721 E10.69365
G1 X125.115 Y74.721 E13.86967
G1 X125.279 Y74.885 E13.88426
G1 X125.279 Y90.764 E14.88830
G1 X125.213 Y90.887 E14.89707
G1 X123.205 Y92.241 E15.05025
G1 X122.108 Y92.724 E15.12599
G1 X121.483 Y92.810 E15.16588
G1 X120.919 Y92.727 E15.20197
G1 X119.815 Y92.199 E15.27936
G1 X118.355 Y91.147 E15.39312
G1 X117.768 Y90.761 E15.43757
G1 X116.991 Y90.391 E15.49193
G1 X116.540 Y90.316 E15.52086
G1 X116.030 Y90.384 E15.55339
G1 X115.245 Y90.718 E15.60736
G1 X114.237 Y91.354 E15.68268
G1 X112.898 Y92.266 E15.78513
G1 X112.003 Y92.720 E15.84857
G1 X111.703 Y92.817 E15.86853
G1 X111.612 Y93.516 E15.91311
G1 X112.816 Y94.289 E16.00356
G1 X113.639 Y94.680 E16.06118
G1 X113.953 Y94.742 E16.08143
G1 F900.000 E14.58143
G92 E0
G1 X97.807 Y93.129 F7500.000
G1 E1.50000 F900.000
G1 X97.176 Y94.196 E1.57833 F360.000
G1 X96.933 Y94.531 E1.60451
G1 X96.371 Y94.533 E1.64002
G1 X96.143 Y94.224 E1.66430
G1 X95.606 Y93.286 E1.73264
G1 X96.076 Y92.695 E1.78038
G1 X96.456 Y92.809 E1.80548
G1 X96.535 Y92.810 E1.81049
G1 X96.853 Y92.721 E1.83138
G1 X97.219 Y92.523 E1.85765
G1 X97.765 Y93.086 E1.90728
G1 F900.000 E0.40728
G92 E0
G1 X107.691 Y91.822 F7500.000
G1 E1.50000 F900.000
G1 X108.355 Y90.898 E1.57193 F360.000
G1 X108.770 Y90.468 E1.60974
G1 X109.311 Y90.528 E1.64409
G1 X110.075 Y91.767 E1.73617
G1 X109.673 Y92.363 E1.78164
G1 X108.972 Y92.253 E1.82653
G1 X108.564 Y92.334 E1.85279
G1 X108.228 Y92.483 E1.87606
G1 X107.729 Y91.868 E1.92612
G1 X107.594 Y93.242 F7500.000
G1 X106.962 Y94.301 E2.00410 F360.000
G1 X106.742 Y94.547 E2.02495
G1 X106.256 Y94.548 E2.05572
G1 X105.958 Y94.221 E2.08371
G1 X105.332 Y93.236 E2.15750
G1 X105.789 Y92.621 E2.20595
G1 X106.462 Y92.810 E2.25015
G1 X106.538 Y92.810 E2.25499
G1 X107.136 Y92.642 E2.29421
G1 X107.558 Y93.194 E2.33815
G1 F900.000 E0.83815
G92 E0
G1 X105.239 Y91.748 F7500.000
G1 E1.50000 F900.000
G1 X104.658 Y92.400 E1.55524 F360.000
G1 X104.342 Y92.233 E1.57781
G1 X104.257 Y92.217 E1.58327
G1 X103.920 Y92.260 E1.60477
G1 X103.839 Y92.299 E1.61043
G1 X103.539 Y92.587 E1.63674
G1 X103.019 Y93.628 E1.71030
G1 X101.889 Y96.700 E1.91727
G1 X101.115 Y96.700 E1.96622
G1 X100.008 Y93.694 E2.16880
G1 X99.489 Y92.628 E2.24375
G1 X99.157 Y92.297 E2.27336
G1 X99.069 Y92.257 E2.27947
G1 X98.725 Y92.230 E2.30134
G1 X98.224 Y92.355 E2.33400
G1 X97.784 Y91.722 E2.38272
G1 X98.354 Y90.898 E2.44609
G1 X98.774 Y90.463 E2.48432
G1 X99.229 Y90.453 E2.51312
G1 X99.498 Y90.712 E2.53671
G1 X99.781 Y91.085 E2.56635
G1 X100.445 Y92.045 E2.64011
G1 X101.083 Y92.687 E2.69736
G1 X101.141 Y92.720 E2.70162
G1 X101.461 Y92.810 E2.72258
G1 X101.537 Y92.810 E2.72742
G1 X101.909 Y92.691 E2.75212
G1 X102.319 Y92.331 E2.78659
G1 X102.878 Y91.586 E2.84546
G1 X103.355 Y90.898 E2.89843
G1 X103.775 Y90.463 E2.93666
G1 X104.230 Y90.453 E2.96546
G1 X104.499 Y90.712 E2.98905
G1 X104.782 Y91.085 E3.01869
G1 X105.205 Y91.698 E3.06579
G1 F900.000 E1.56579
G92 E0
G1 X102.372 Y93.781 F7500.000
G1 E1.50000 F900.000
G1 X101.888 Y95.105 E1.58912 F360.000
G1 X101.116 Y95.106 E1.63799
G1 X100.631 Y93.782 E1.72710
G1 X101.094 Y93.285 E1.77002
G1 X101.384 Y93.367 E1.78909
G1 X101.614 Y93.367 E1.80361
G1 X101.909 Y93.284 E1.82302
G1 X102.331 Y93.737 E1.86214
M140 S100 ; set bed temperature
G1 F900.000 E0.36214
G92 E0
G1 Z0.900 F7500.000
G1 X79.481 Y92.055 F7500.000
G1 E1.50000 F900.000
G1 X78.855 Y92.681 E1.55358 F1680.000
G1 X78.000 Y92.910 E1.60718
G1 X77.145 Y92.681 E1.66079
G1 X76.519 Y92.055 E1.71437
G1 X76.290 Y91.200 E1.76797
G1 X76.519 Y90.346 E1.82151
G1 X77.144 Y89.719 E1.87513
G1 X78.000 Y89.490 E1.92874
G1 X78.766 Y89.695 E1.97674
G1 X78.856 Y89.719 E1.98235 F1680.000
G1 X79.481 Y90.346 E2.03597
G1 X79.710 Y91.200 E2.08951
G1 X79.497 Y91.998 E2.13948
G1 F900.000 E0.63948
G92 E0
G1 X78.765 Y89.602 F7500.000
G1 X80.733 Y91.413 F7500.000
G1 E1.50000 F900.000
G1 X81.086 Y90.096 E1.58254 F1680.000
G1 X81.894 Y89.286 E1.65183
G1 X83.000 Y88.990 E1.72111
G1 X84.004 Y89.258 E1.78399
G1 X84.106 Y89.286 E1.79038 F1680.000
G1 X84.914 Y90.096 E1.85967
G1 X85.210 Y91.200 E1.92888
G1 X84.914 Y92.305 E1.99815
G1 X84.105 Y93.114 E2.06739
G1 X83.000 Y93.410 E2.13666
G1 X81.895 Y93.114 E2.20594
G1 X81.086 Y92.305 E2.27518
G1 X80.847 Y91.413 E2.33112
G1 X80.793 Y91.413 E2.33438
G1 F900.000 E0.83438
G92 E0
G1 X84.054 Y89.166 F7500.000
G1 X85.876 Y91.200 F7500.000
G1 E1.50000 F900.000
G1 X86.294 Y89.639 E1.59784 F2400.000
G1 X87.437 Y88.494 E1.69577
G1 X89.000 Y88.076 E1.79370
G1 X90.344 Y88.436 E1.87790
G1 X90.562 Y88.494 E1.89155 F2400.000
G1 X91.706 Y89.638 E1.98952
G1 X92.124 Y91.200 E2.08738
G1 X91.706 Y92.763 E2.18530
G1 X90.561 Y93.906 E2.28323
G1 X89.000 Y94.324 E2.38108
G1 X87.438 Y93.906 E2.47899
G1 X86.294 Y92.763 E2.57688
G1 X85.891 Y91.258 E2.67117
G1 X86.290 Y91.200 F7500.000
G1 X86.653 Y89.846 E2.75605 F1680.000
G1 X87.644 Y88.853 E2.84100
G1 X87.759 Y88.822 E2.84817
G1 X89.000 Y88.490 E2.92594 F1680.000
G1 X90.355 Y88.853 E3.01082
G1 X91.347 Y89.845 E3.09581
G1 X91.710 Y91.200 E3.18069
G1 X91.347 Y92.556 E3.26564
G1 X90.354 Y93.547 E3.35059
G1 X89.000 Y93.910 E3.43547
G1 X87.644 Y93.547 E3.52041
G1 X86.653 Y92.556 E3.60532
G1 X86.305 Y91.258 E3.68663
G1 F900.000 E2.18663
G92 E0
G1 X87.728 Y88.423 F7500.000
G1 X96.949 Y105.307 F7500.000
G1 E1.50000 F900.000
G1 X96.708 Y104.765 E1.53591 F1680.000
G1 X96.659 Y104.336 E1.56207
G1 X96.742 Y103.809 E1.59432
G1 X96.856 Y103.571 E1.61031
G1 X97.014 Y103.375 E1.62556
G1 X97.212 Y103.220 E1.64078
G1 X97.452 Y103.107 E1.65689
G1 X97.990 Y103.025 E1.68981
G1 X98.417 Y103.073 E1.71583
G1 X98.770 Y103.219 E1.73894
G1 X99.039 Y103.436 E1.75986
G1 X99.216 Y103.698 E1.77898
G1 X99.310 Y104.009 E1.79862
G1 X99.339 Y104.372 E1.82069
G1 X99.314 Y104.679 E1.83932
G1 X99.194 Y105.084 E1.86488
G1 X99.150 Y105.084 E1.86756
G1 X99.104 Y105.160 E1.87293
G1 X98.921 Y105.340 E1.88847
G1 X98.694 Y105.475 E1.90447
G1 X98.247 Y105.624 E1.93298
G1 X98.067 Y105.028 E1.97066
G1 X97.820 Y105.037 E1.98561
G1 X97.605 Y106.001 E2.04540
G1 X99.300 Y106.001 E2.14799
G1 X99.300 Y107.082 E2.21342
G1 X97.642 Y107.082 E2.31379
G1 X97.642 Y107.562 E2.34284
G1 X99.300 Y107.562 E2.44321
G1 X99.300 Y108.645 E2.50877
G1 X99.078 Y108.645 E2.52222
G1 X99.017 Y108.886 E2.53730
G1 X99.300 Y109.040 E2.55681
G1 X99.300 Y112.020 E2.73721
G1 X98.883 Y112.020 E2.76248
G1 X98.835 Y112.283 E2.77864
G1 X99.280 Y112.451 E2.80746
G1 X99.280 Y113.871 E2.89344
G1 X97.415 Y114.564 E3.01388
G1 X97.462 Y114.827 E3.03008
G1 X97.580 Y114.827 E3.03723
G1 X97.580 Y115.547 E3.08082
G1 X99.299 Y115.547 E3.18487
G1 X99.299 Y116.652 E3.25176
G1 X97.580 Y116.652 E3.35582
G1 X97.580 Y117.159 E3.38651
G1 X99.299 Y117.159 E3.49057
G1 X99.299 Y119.485 E3.63137
G1 X98.898 Y119.485 E3.65566
G1 X99.189 Y119.883 E3.68550
G1 X99.278 Y120.110 E3.70029
G1 X99.339 Y120.649 E3.73307
G1 X99.312 Y120.992 E3.75394
G1 X99.227 Y121.283 E3.77230
G1 X99.080 Y121.525 E3.78943
G1 X98.873 Y121.711 E3.80625
G1 X98.625 Y121.827 E3.82282
G1 X98.357 Y121.865 E3.83917
G1 X98.125 Y121.835 E3.85335
G1 X97.911 Y121.744 E3.86740
G1 X97.662 Y121.531 E3.88729
G1 X97.643 Y121.851 E3.90670
G1 X97.580 Y121.832 E3.91067
G1 X97.580 Y122.278 E3.93766
G1 X99.299 Y122.278 E4.04171
G1 X99.299 Y123.384 E4.10866
G1 X97.580 Y123.384 E4.21272
G1 X97.580 Y124.103 E4.25624
G1 X96.616 Y124.103 E4.31460
G1 X96.616 Y121.559 E4.46859
G1 X96.828 Y121.559 E4.48141
G1 X96.622 Y121.084 E4.51272
G1 X96.577 Y120.651 E4.53906
G1 X96.602 Y120.295 E4.56067
G1 X96.681 Y120.007 E4.57877
G1 X96.816 Y119.779 E4.59478
G1 X97.175 Y119.451 E4.62425
G1 X96.616 Y119.451 E4.65811
G1 X96.616 Y114.860 E4.93601
G1 X95.467 Y115.287 E5.01020
G1 X95.467 Y113.781 E5.10131
G1 X97.070 Y113.286 E5.20288
G1 X97.070 Y113.050 E5.21715
G1 X95.467 Y112.549 E5.31885
G1 X95.467 Y111.011 E5.41197
G1 X98.358 Y112.103 E5.59903
G1 X98.358 Y110.958 E5.66832
G1 X96.699 Y110.958 E5.76874
G1 X96.699 Y109.877 E5.83418
G1 X96.984 Y109.877 E5.85145
G1 X96.758 Y109.437 E5.88141
G1 X96.699 Y108.906 E5.91372
G1 X96.699 Y105.307 E6.13159
G1 X96.889 Y105.307 E6.14309
G1 X96.661 Y105.029 F7500.000
G1 X92.679 Y107.710 F7500.000
G1 X96.118 Y107.225 E6.35336 F1680.000
G1 X93.794 Y109.807 E6.56363
G1 X95.318 Y112.927 E6.77387
G1 X92.145 Y111.515 E6.98413
G1 X89.647 Y113.928 E7.19440
G1 X90.010 Y110.473 E7.40468
G1 X86.942 Y108.844 E7.61495
G1 X90.341 Y108.122 E7.82524
G1 X90.943 Y104.700 E8.03557
G1 X92.649 Y107.658 E8.24224
G1 X92.960 Y107.426 F7500.000
G1 F900.000 E6.74224
G92 E0
G1 X85.403 Y117.708 F7500.000
G1 E1.50000 F900.000
G1 X85.403 Y121.991 E1.75932 F1680.000
G1 X81.693 Y124.134 E2.01866
G1 X77.982 Y121.991 E2.27805
G1 X77.982 Y117.707 E2.53737
G1 X81.693 Y115.566 E2.79673
G1 X85.351 Y117.678 E3.05240
G1 X85.797 Y117.777 F7500.000
G1 F900.000 E1.55240
G92 E0
G1 X95.503 Y115.700 F7500.000
G1 E1.50000 F900.000
G1 X96.216 Y115.435 E1.54604 F2400.000
G1 X96.216 Y119.851 E1.81334
G1 X96.309 Y119.851 E1.81900
G1 X96.206 Y120.228 E1.84264
G1 X96.176 Y120.658 E1.86879
G1 X96.216 Y121.045 E1.89230
G1 X96.216 Y124.400 E2.09540
G1 X95.503 Y124.400 E2.13856
G1 X95.503 Y115.760 E2.66158
G1 X95.376 Y113.391 F7500.000
G1 X95.067 Y113.486 E2.68114 F2400.000
G1 X95.067 Y113.697 E2.69389
G1 X90.461 Y113.697 E2.97270
G1 X92.229 Y111.990 E3.12145
G1 X95.321 Y113.367 E3.32636
G1 X95.067 Y110.432 F7500.000
G1 X95.067 Y110.937 E3.35692 F2400.000
G1 X94.819 Y110.994 E3.37232
G1 X94.272 Y109.874 E3.44781
G1 X96.299 Y107.623 E3.63118
G1 X96.299 Y108.928 E3.71022
G1 X96.360 Y109.477 E3.74364
G1 X96.299 Y109.477 E3.74735
G1 X96.299 Y110.897 E3.83333
G1 X95.123 Y110.453 E3.90941
G1 F900.000 E2.40941
G92 E0
G1 X97.654 Y104.517 F7500.000
G1 E1.50000 F900.000
G1 X97.596 Y104.449 E1.50539 F2400.000
G1 X97.575 Y104.357 E1.51109
G1 X97.600 Y104.249 E1.51779
G1 X97.672 Y104.172 E1.52419
G1 X97.780 Y104.130 E1.53125
G1 X97.990 Y104.110 E1.54401
G1 X98.248 Y104.133 E1.55966
G1 X98.398 Y104.199 E1.56957
G1 X98.424 Y104.336 E1.57805
G1 X98.404 Y104.464 E1.58585
G1 X98.297 Y104.531 E1.59350
G1 X97.943 Y104.645 E1.61605
G1 X97.709 Y104.541 E1.63154
G1 F900.000 E0.13154
G92 E0
G1 X99.700 Y105.601 F7500.000
G1 E1.50000 F900.000
G1 X99.459 Y105.601 E1.51460 F2400.000
G1 X99.709 Y104.752 E1.56816
G1 X99.740 Y104.373 E1.59123
G1 X99.705 Y103.934 E1.61787
G1 X99.581 Y103.525 E1.64376
G1 X99.337 Y103.163 E1.67017
G1 X98.976 Y102.872 E1.69823
G1 X98.518 Y102.682 E1.72825
G1 X97.983 Y102.622 E1.76087
G1 X97.335 Y102.720 E1.80051
G1 X97.000 Y102.877 E1.82288
G1 X96.731 Y103.088 E1.84362
G1 X96.515 Y103.356 E1.86447
G1 X96.356 Y103.690 E1.88683
G1 X96.256 Y104.327 E1.92587
G1 X96.321 Y104.907 E1.96121
G1 X96.299 Y104.907 E1.96256
G1 X96.299 Y106.796 E2.07691
G1 X92.890 Y107.276 E2.28528
G1 X90.740 Y103.547 E2.54585
G1 X89.994 Y107.787 E2.80645
G1 X85.783 Y108.681 E3.06702
G1 X89.584 Y110.700 E3.32754
G1 X89.134 Y114.980 E3.58806
G1 X90.298 Y113.855 E3.68607
G1 X90.298 Y124.400 E4.32441
G1 X82.506 Y124.400 E4.79607
G1 X82.443 Y124.163 E4.81093
G1 X85.803 Y122.222 E5.04581
G1 X85.803 Y117.477 E5.33309
G1 X81.693 Y115.104 E5.62035
G1 X77.582 Y117.476 E5.90767
G1 X77.582 Y122.222 E6.19496
G1 X80.943 Y124.163 E6.42988
G1 X80.879 Y124.400 E6.44475
G1 X75.600 Y124.400 E6.76433
G1 X75.600 Y91.245 E8.77129
G1 X75.878 Y91.209 E8.78828
G1 X76.160 Y92.262 E8.85429
G1 X76.938 Y93.040 E8.92086
G1 X78.000 Y93.324 E8.98743
G1 X79.062 Y93.040 E9.05400
G1 X79.840 Y92.262 E9.12058
G1 X79.960 Y91.813 E9.14875
G1 X80.540 Y91.813 E9.18383
G1 X80.727 Y92.512 E9.22768
G1 X81.688 Y93.473 E9.30991
G1 X83.000 Y93.824 E9.39215
G1 X84.312 Y93.473 E9.47439
G1 X85.273 Y92.512 E9.55662
G1 X85.624 Y91.200 E9.63887
G1 X85.273 Y89.889 E9.72104
G1 X84.313 Y88.927 E9.80331
G1 X83.000 Y88.576 E9.88556
G1 X81.687 Y88.927 E9.96782
G1 X80.727 Y89.889 E10.05009
G1 X80.373 Y91.211 E10.13298
G1 X80.127 Y91.211 E10.14785
G1 X79.840 Y90.139 E10.21507
G1 X79.063 Y89.360 E10.28168
G1 X78.000 Y89.076 E10.34827
G1 X76.937 Y89.360 E10.41486
G1 X76.160 Y90.139 E10.48146
G1 X75.878 Y91.191 E10.54740
G1 X75.600 Y91.154 E10.56439
G1 X75.600 Y75.600 E11.50596
G1 X124.400 Y75.600 E14.45999
G1 X124.400 Y90.376 E15.35443
G1 X122.790 Y91.464 E15.47205
G1 X121.849 Y91.878 E15.53427
G1 X121.504 Y91.925 E15.55537
G1 X121.153 Y91.876 E15.57683
G1 X121.002 Y91.785 E15.58748
G1 X120.250 Y91.433 E15.63776
G1 X118.837 Y90.412 E15.74327
G1 X118.186 Y89.983 E15.79047
G1 X117.350 Y89.589 E15.84641
G1 X117.152 Y89.514 E15.85923
G1 X116.503 Y89.423 E15.89890
G1 X115.832 Y89.515 E15.93989
G1 X114.848 Y89.930 E16.00451
G1 X113.762 Y90.615 E16.08227
G1 X112.454 Y91.507 E16.17809
G1 X111.712 Y91.885 E16.22847
G1 X111.508 Y91.921 E16.24106
G1 X111.411 Y91.901 E16.24706
G1 X110.933 Y91.467 E16.28614
G1 X110.104 Y90.141 E16.38076
G1 X109.707 Y89.709 E16.41632
G1 X109.532 Y89.560 E16.43026
G1 X109.005 Y89.405 E16.46348
G1 X108.448 Y89.561 E16.49852
G1 X108.217 Y89.777 E16.51763
G1 X107.693 Y90.314 E16.56310
G1 X106.698 Y91.704 E16.66655
G1 X106.507 Y91.875 E16.68205
G1 X106.119 Y91.477 E16.71575
G1 X105.481 Y90.550 E16.78384
G1 X105.144 Y90.106 E16.81756
G1 X104.695 Y89.683 E16.85493
G1 X104.522 Y89.552 E16.86807
G1 X104.000 Y89.406 E16.90088
G1 X103.446 Y89.561 E16.93568
G1 X103.216 Y89.777 E16.95480
G1 X102.690 Y90.317 E17.00039
G1 X102.164 Y91.075 E17.05628
G1 X101.681 Y91.721 E17.10511
G1 X101.506 Y91.875 E17.11921
G1 X101.118 Y91.477 E17.15290
G1 X100.480 Y90.550 E17.22099
G1 X100.143 Y90.106 E17.25472
G1 X99.694 Y89.683 E17.29208
G1 X99.521 Y89.552 E17.30522
G1 X98.999 Y89.406 E17.33803
G1 X98.445 Y89.561 E17.37283
G1 X98.215 Y89.777 E17.39196
G1 X97.689 Y90.317 E17.43756
G1 X97.163 Y91.075 E17.49342
G1 X96.681 Y91.721 E17.54221
G1 X96.491 Y91.888 E17.55755
G1 X96.020 Y91.490 E17.59490
G1 X95.367 Y90.701 E17.65688
G1 X94.248 Y89.290 E17.76589
G1 X93.296 Y89.793 E17.83109
G1 X93.772 Y91.295 E17.92645
G1 X94.849 Y93.726 E18.08738
G1 X95.415 Y94.722 E18.15675
G1 X95.801 Y95.238 E18.19574
G1 X96.258 Y95.616 E18.23166
G1 X96.901 Y95.667 E18.27067
G1 X97.410 Y95.342 E18.30726
G1 X97.903 Y94.693 E18.35658
G1 X98.405 Y93.848 E18.41609
G1 X98.820 Y93.260 E18.45963
G1 X99.194 Y94.029 E18.51138
G1 X100.232 Y96.846 E18.69314
G1 X100.824 Y97.863 E18.76432
G1 X101.500 Y98.210 E18.81036
G1 X102.181 Y97.858 E18.85676
G1 X102.794 Y96.787 E18.93143
G1 X103.832 Y93.963 E19.11359
G1 X104.199 Y93.209 E19.16435
G1 X104.513 Y93.586 E19.19404
G1 X105.273 Y94.782 E19.27983
G1 X105.916 Y95.473 E19.33694
G1 X106.490 Y95.661 E19.37352
G1 X107.067 Y95.492 E19.40989
G1 X107.654 Y94.854 E19.46236
G1 X108.226 Y93.898 E19.52983
G1 X108.542 Y93.451 E19.56296
G1 X108.900 Y93.163 E19.59074
G1 X109.009 Y93.141 E19.59751
G1 X109.250 Y93.182 E19.61228
G1 X110.167 Y93.636 E19.67421
G1 X112.371 Y95.050 E19.83275
G1 X113.413 Y95.541 E19.90246
G1 X114.010 Y95.643 E19.93911
G1 X114.614 Y95.523 E19.97641
G1 X115.388 Y94.899 E20.03656
G1 X116.036 Y93.909 E20.10822
G1 X116.338 Y93.400 E20.14404
G1 X116.513 Y93.209 E20.15969
G1 X116.738 Y93.419 E20.17833
G1 X117.603 Y94.692 E20.27146
G1 X117.978 Y95.095 E20.30477
G1 X118.629 Y95.523 E20.35197
G1 X119.258 Y95.731 E20.39205
G1 X120.531 Y95.914 E20.46990
G1 X121.811 Y95.930 E20.54741
G1 X122.699 Y95.868 E20.60126
G1 X123.844 Y95.681 E20.67148
G1 X124.400 Y95.530 E20.70637
G1 X124.400 Y124.400 E22.45397
G1 X97.980 Y124.400 E24.05326
G1 X97.980 Y123.784 E24.09055
G1 X99.699 Y123.784 E24.19461
G1 X99.699 Y121.878 E24.30998
G1 X99.333 Y121.878 E24.33213
G1 X99.596 Y121.446 E24.36272
G1 X99.707 Y121.065 E24.38677
G1 X99.741 Y120.642 E24.41247
G1 X99.655 Y119.885 E24.45857
G1 X99.699 Y119.885 E24.46125
G1 X99.699 Y115.147 E24.74806
G1 X97.980 Y115.147 E24.85212
G1 X97.980 Y114.780 E24.87431
G1 X99.680 Y114.149 E24.98408
G1 X99.680 Y112.420 E25.08876
G1 X99.700 Y112.420 E25.08997
G1 X99.700 Y105.661 E25.49911
G1 X101.499 Y97.760 F7500.000
G1 X101.892 Y97.557 E25.52590 F1680.000
G1 X102.431 Y96.617 E25.59144
G1 X103.463 Y93.807 E25.77267
G1 X103.912 Y92.893 E25.83430
G1 X104.091 Y92.721 E25.84933
G1 X104.212 Y92.705 E25.85675
G1 X104.370 Y92.789 E25.86758
G1 X104.837 Y93.350 E25.91174
G1 X105.591 Y94.537 E25.99685
G1 X106.139 Y95.125 E26.04550
G1 X106.497 Y95.242 E26.06831
G1 X106.848 Y95.139 E26.09045
G1 X107.332 Y94.613 E26.13372
G1 X107.896 Y93.669 E26.20031
G1 X108.245 Y93.176 E26.23687
G1 X108.732 Y92.788 E26.27454
G1 X109.004 Y92.734 E26.29131
G1 X109.356 Y92.795 E26.31295
G1 X109.430 Y92.824 E26.31777
G1 X110.361 Y93.285 E26.38064
G1 X112.567 Y94.700 E26.53927
G1 X113.531 Y95.156 E26.60384
G1 X114.004 Y95.236 E26.63288
G1 X114.439 Y95.150 E26.65976
G1 X115.086 Y94.628 E26.71003
G1 X115.697 Y93.696 E26.77754
G1 X116.015 Y93.159 E26.81528
G1 X116.369 Y92.778 E26.84674
G1 X116.507 Y92.738 E26.85544
G1 X116.653 Y92.774 E26.86453
G1 X117.044 Y93.157 E26.89769
G1 X117.913 Y94.436 E26.99129
G1 X118.244 Y94.792 E27.02073
G1 X118.787 Y95.152 E27.06017
G1 X119.353 Y95.340 E27.09625
G1 X120.558 Y95.514 E27.16995
G1 X121.802 Y95.529 E27.24529
G1 X122.654 Y95.470 E27.29699
G1 X123.759 Y95.290 E27.36477
G1 X124.800 Y95.004 E27.43010
G1 X124.800 Y124.800 E29.23378
G1 X95.103 Y124.800 E31.03144
G1 X95.103 Y114.097 E31.67933
G1 X90.698 Y114.097 E31.94598
G1 X90.698 Y124.800 E32.59387
G1 X75.200 Y124.800 E33.53202
G1 X75.200 Y75.200 E36.53447
G1 X124.800 Y75.200 E39.53693
G1 X124.800 Y90.588 E40.46845
G1 X122.984 Y91.815 E40.60111
G1 X121.959 Y92.267 E40.66890
G1 X121.503 Y92.329 E40.69675
G1 X121.053 Y92.266 E40.72427
G1 X120.046 Y91.779 E40.79196
G1 X118.614 Y90.744 E40.89895
G1 X117.987 Y90.331 E40.94436
G1 X117.052 Y89.904 E41.00661
G1 X116.502 Y89.827 E41.04021
G1 X115.937 Y89.904 E41.07472
G1 X115.037 Y90.284 E41.13388
G1 X113.980 Y90.951 E41.20954
G1 X112.660 Y91.851 E41.30623
G1 X111.837 Y92.269 E41.36212
G1 X111.503 Y92.328 E41.38263
G1 X111.236 Y92.274 E41.39910
G1 X110.626 Y91.728 E41.44871
G1 X109.784 Y90.384 E41.54469
G1 X109.337 Y89.919 E41.58376
G1 X109.002 Y89.821 E41.60485
G1 X108.650 Y89.920 E41.62700
G1 X108.497 Y90.063 E41.63966
G1 X108.000 Y90.572 E41.68278
G1 X107.001 Y91.968 E41.78663
G1 X106.652 Y92.281 E41.81503
G1 X106.500 Y92.323 E41.82459
G1 X106.351 Y92.282 E41.83394
G1 X105.809 Y91.731 E41.88073
G1 X105.160 Y90.790 E41.94991
G1 X104.844 Y90.372 E41.98164
G1 X104.341 Y89.917 E42.02273
G1 X104.000 Y89.821 E42.04414
G1 X103.649 Y89.920 E42.06622
G1 X103.496 Y90.063 E42.07887
G1 X102.999 Y90.573 E42.12201
G1 X102.489 Y91.307 E42.17609
G1 X101.976 Y91.994 E42.22802
G1 X101.651 Y92.281 E42.25425
G1 X101.499 Y92.323 E42.26381
G1 X101.350 Y92.282 E42.27317
G1 X100.808 Y91.731 E42.31995
G1 X100.159 Y90.790 E42.38913
G1 X99.843 Y90.372 E42.42086
G1 X99.340 Y89.917 E42.46195
G1 X98.999 Y89.821 E42.48336
G1 X98.648 Y89.920 E42.50544
G1 X98.495 Y90.063 E42.51809
G1 X97.998 Y90.573 E42.56123
G1 X97.489 Y91.307 E42.61529
G1 X96.976 Y91.994 E42.66720
G1 X96.650 Y92.281 E42.69347
G1 X96.500 Y92.323 E42.70292
G1 X96.322 Y92.269 E42.71415
G1 X95.733 Y91.771 E42.76085
G1 X95.057 Y90.952 E42.82515
G1 X94.142 Y89.798 E42.91428
G1 X93.776 Y89.992 E42.93935
G1 X94.145 Y91.149 E43.01285
G1 X95.207 Y93.547 E43.17160
G1 X95.750 Y94.502 E43.23813
G1 X96.079 Y94.941 E43.27131
G1 X96.418 Y95.227 E43.29820
G1 X96.799 Y95.258 E43.32132
G1 X97.136 Y95.043 E43.34553
G1 X97.569 Y94.472 E43.38890
G1 X98.070 Y93.628 E43.44829
G1 X98.640 Y92.818 E43.50828
G1 X98.799 Y92.716 E43.51971
G1 X98.912 Y92.725 E43.52654
G1 X99.085 Y92.891 E43.54109
G1 X99.563 Y93.873 E43.60719
G1 X100.596 Y96.676 E43.78802
G1 X101.107 Y97.558 E43.84972
G1 X101.446 Y97.733 E43.87282
G1 X101.752 Y98.070 F7500.000
G1 F900.000 E42.37282
G92 E0
G1 X94.101 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X94.101 Y114.297 E2.14789 F1680.000
G1 F900.000 E0.64789
G92 E0
G1 X93.051 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X93.051 Y114.297 E2.14789 F1680.000
G1 F900.000 E0.64789
G92 E0
G1 X92.101 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X92.101 Y114.297 E2.14789 F1680.000
G1 F900.000 E0.64789
G92 E0
G1 X91.301 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X91.301 Y114.297 E2.14789 F1680.000
G1 F900.000 E0.64789
G92 E0
G1 X98.446 Y120.974 F7500.000
G1 E1.50000 F900.000
G1 X98.463 Y120.730 E1.51478 F1680.000
G1 X98.433 Y120.585 E1.52375
G1 X98.257 Y120.389 E1.53970
G1 X98.192 Y120.256 E1.54864
G1 X98.168 Y120.067 E1.56021
G1 X98.093 Y119.755 E1.57962
G1 X97.998 Y119.518 E1.59503
G1 X98.132 Y119.431 E1.60469
G1 X98.582 Y119.208 E1.63511
G1 X98.745 Y119.662 F7500.000
G1 X98.274 Y119.361 E1.66893 F1680.000
G1 X98.357 Y119.114 E1.68465
G1 X98.357 Y118.067 E1.74806
G1 X98.341 Y119.634 F7500.000
G1 X97.910 Y119.489 E1.77560 F1680.000
G1 X97.748 Y119.227 E1.79424
G1 X97.667 Y119.180 E1.79991
G1 X97.597 Y119.180 E1.80412
G1 X97.486 Y119.069 E1.81363
G1 X97.486 Y118.067 E1.87432
G1 F900.000 E0.37432
G92 E0
G1 X99.100 Y110.006 F7500.000
G1 E1.50000 F900.000
G1 X98.166 Y109.768 E1.55837 F1680.000
G1 X98.150 Y109.496 E1.57486
G1 X98.101 Y109.292 E1.58756
G1 X98.513 Y109.624 F7500.000
G1 X97.905 Y109.866 E1.62716 F1680.000
G1 X97.529 Y109.912 E1.65009
G1 X97.415 Y109.907 E1.65699
G1 X97.146 Y109.680 E1.67830
G1 F900.000 E0.17830
G92 E0
G1 X95.755 Y106.596 F7500.000
G1 E1.50000 F900.000
G1 X96.025 Y106.326 E1.52402 F2700.000
G1 X96.025 Y105.738 E1.56101
G1 X95.071 Y106.693 E1.64592
G1 X94.387 Y106.789 E1.68940
G1 X96.025 Y105.150 E1.83520
G1 X96.009 Y104.579 E1.87116
G1 X93.702 Y106.886 E2.07638
G1 X93.030 Y106.970 E2.11903
G1 X96.036 Y103.964 E2.38648
G1 F900.000 E0.88648
G92 E0
G1 X99.450 Y102.902 F7500.000
G1 E1.50000 F900.000
G1 X106.424 Y95.927 E2.12053 F2700.000
G1 X105.982 Y95.782 E2.14984
G1 X99.124 Y102.640 E2.75993
G1 X98.710 Y102.466 E2.78819
G1 X105.620 Y95.556 E3.40293
G1 X105.336 Y95.252 E3.42910
G1 X98.215 Y102.373 E4.06267
G1 X97.596 Y102.404 E4.10164
G1 X101.488 Y98.512 E4.44791
G1 X101.100 Y98.312 E4.47538
G1 X92.815 Y106.597 E5.21252
G1 X92.600 Y106.224 E5.23960
G1 X100.712 Y98.112 E5.96132
G1 X100.458 Y97.778 E5.98772
G1 X92.385 Y105.852 E6.70601
G1 X92.170 Y105.479 F7500.000
G1 X100.242 Y97.406 E7.42418 F2700.000
G1 X100.025 Y97.035 E7.45123
G1 X91.955 Y105.106 E8.16928
G1 X91.739 Y104.733 E8.19636
G1 X99.856 Y96.616 E8.91848
G1 X99.698 Y96.187 E8.94728
G1 X91.524 Y104.360 E9.67445
G1 X91.309 Y103.987 E9.70153
G1 X99.539 Y95.757 E10.43374
G1 X99.381 Y95.327 E10.46255
G1 X91.094 Y103.614 E11.19981
G1 X90.879 Y103.241 E11.22690
G1 X99.223 Y94.897 E11.96921
G1 X98.176 Y94.768 F7500.000
G1 X98.899 Y94.046 E12.03346 F2700.000
G1 X99.065 Y94.468 E12.06198
G1 X75.874 Y117.659 E14.12527
G1 X75.874 Y118.247 E14.16226
G1 X85.356 Y108.764 E15.00591
G1 X85.740 Y108.968 E15.03327
G1 X75.874 Y118.835 E15.91109
G1 X75.874 Y119.423 E15.94808
G1 X77.308 Y117.988 E16.07574
G1 X77.308 Y118.576 E16.11273
G1 X75.874 Y120.011 E16.24040
G1 X75.874 Y120.599 E16.27739
G1 X77.308 Y119.164 E16.40506
G1 X77.308 Y119.752 E16.44205
G1 X75.874 Y121.187 E16.56972
G1 X75.874 Y121.775 E16.60670
G1 X77.308 Y120.340 E16.73437
G1 X77.308 Y120.928 E16.77136
G1 X75.874 Y122.363 E16.89903
G1 X75.874 Y122.951 E16.93602
G1 X77.308 Y121.516 E17.06369
G1 X77.308 Y122.104 E17.10068
G1 X75.874 Y123.539 E17.22834
G1 X75.894 Y124.106 E17.26410
G1 X77.506 Y122.494 E17.40754
G1 X77.879 Y122.709 E17.43461
G1 X76.461 Y124.126 E17.56069
G1 X77.049 Y124.126 E17.59768
G1 X78.251 Y122.925 E17.70460
G1 X78.624 Y123.140 E17.73168
G1 X77.637 Y124.126 E17.81946
G1 X78.225 Y124.126 E17.85645
G1 X78.997 Y123.355 E17.92509
G1 X79.370 Y123.570 E17.95216
G1 X78.813 Y124.126 E18.00165
G1 X79.401 Y124.126 E18.03864
G1 X79.742 Y123.785 E18.06898
G1 X80.083 Y124.033 E18.09547
G1 X79.989 Y124.126 E18.10382
G1 X83.517 Y124.126 F7500.000
G1 X84.152 Y123.492 E18.16028 F2700.000
G1 X84.105 Y124.126 E18.20032
G1 X90.024 Y118.207 E18.72697
G1 X90.024 Y117.619 E18.76396
G1 X86.077 Y121.567 E19.11521
G1 X86.077 Y120.979 E19.15220
G1 X90.024 Y117.031 E19.50344
G1 X90.024 Y116.443 E19.54043
G1 X86.077 Y120.391 E19.89168
G1 X86.077 Y119.803 E19.92867
G1 X90.024 Y115.855 E20.27992
G1 X90.024 Y115.267 E20.31691
G1 X86.077 Y119.215 E20.66815
G1 X86.077 Y118.627 E20.70514
G1 X90.024 Y114.679 E21.05639
G1 X88.895 Y114.633 F7500.000
G1 X86.077 Y117.451 E21.30717 F2700.000
G1 X85.788 Y117.152 E21.33333
G1 X88.964 Y113.975 E21.61594
G1 X89.033 Y113.318 E21.65751
G1 X85.415 Y116.937 E21.97943
G1 X85.042 Y116.722 E22.00651
G1 X89.103 Y112.661 E22.36775
G1 X89.172 Y112.004 E22.40932
G1 X84.669 Y116.506 E22.80988
G1 X84.297 Y116.291 E22.83696
G1 X89.241 Y111.347 E23.27683
G1 X89.196 Y110.804 E23.31114
G1 X83.924 Y116.076 E23.78023
G1 X83.551 Y115.861 E23.80731
G1 X88.812 Y110.600 E24.27540
G1 X88.428 Y110.396 E24.30275
G1 X83.178 Y115.646 E24.76984
G1 X82.806 Y115.431 E24.79692
G1 X88.044 Y110.192 E25.26301
G1 X87.660 Y109.988 E25.29036
G1 X82.433 Y115.215 E25.75545
G1 X82.060 Y115.000 E25.78253
G1 X87.276 Y109.784 E26.24662
G1 X86.892 Y109.580 E26.27397
G1 X81.671 Y114.801 E26.73849
G1 X80.281 Y115.603 F7500.000
G1 X86.508 Y109.376 E27.29251 F2700.000
G1 X86.124 Y109.172 E27.31987
G1 X78.891 Y116.405 E27.96340
G1 F900.000 E26.46340
G92 E0
G1 X86.077 Y118.039 F7500.000
G1 E1.50000 F900.000
G1 X88.826 Y115.290 E1.74463 F2700.000
G1 X90.024 Y118.795 F7500.000
G1 X84.693 Y124.126 E2.21897 F2700.000
G1 X85.281 Y124.126 E2.25596
G1 X90.024 Y119.383 E2.67799
G1 X90.024 Y119.971 E2.71498
G1 X85.869 Y124.126 E3.08470
G1 X86.457 Y124.126 E3.12169
G1 X90.024 Y120.559 E3.43910
G1 X90.024 Y121.147 E3.47609
G1 X87.045 Y124.126 E3.74118
G1 X87.633 Y124.126 E3.77817
G1 X90.024 Y121.735 E3.99096
G1 X90.024 Y122.323 E4.02795
G1 X88.221 Y124.126 E4.18843
G1 X88.809 Y124.126 E4.22542
G1 X90.024 Y122.911 E4.33358
G1 X90.024 Y123.499 E4.37057
G1 X89.397 Y124.126 E4.42643
G1 X89.985 Y124.126 E4.46342
G1 X90.024 Y124.087 E4.46697
G1 F900.000 E2.96697
G92 E0
G1 X99.238 Y114.873 F7500.000
G1 E1.50000 F900.000
G1 X118.407 Y95.704 E3.20547 F2700.000
G1 X118.824 Y95.875 E3.23381
G1 X99.826 Y114.873 E4.92405
G1 X99.973 Y115.315 E4.95330
G1 X119.277 Y96.010 E6.67082
G1 X119.791 Y96.084 E6.70348
G1 X99.973 Y115.902 E8.46671
G1 X99.973 Y116.490 E8.50370
G1 X120.305 Y96.158 E10.31264
G1 X120.859 Y96.192 E10.34758
G1 X99.973 Y117.078 E12.20584
G1 X99.973 Y117.666 E12.24282
G1 X121.440 Y96.199 E14.15278
G1 X122.039 Y96.188 E14.19046
G1 X99.973 Y118.254 E16.15369
G1 X99.973 Y118.842 E16.19068
G1 X122.671 Y96.144 E18.21013
G1 X123.367 Y96.036 E18.25443
G1 X99.973 Y119.430 E20.33579
G1 X99.973 Y120.018 E20.37278
G1 X124.094 Y95.897 E22.51886
G1 X124.126 Y96.452 E22.55387
G1 X100.008 Y120.571 E24.69968
G1 X99.947 Y121.220 E24.74068
G1 X124.126 Y97.040 E26.89191
G1 X124.126 Y97.628 E26.92890
G1 X99.973 Y121.782 E29.07785
G1 X99.973 Y122.370 E29.11484
G1 X124.126 Y98.216 E31.26380
G1 X124.126 Y98.804 E31.30079
G1 X99.973 Y122.958 E33.44974
G1 X99.973 Y123.546 E33.48673
G1 X124.126 Y99.392 E35.63569
G1 X124.126 Y99.980 E35.67268
G1 X100.173 Y123.934 E37.80384
G1 X100.568 Y124.126 E37.83151
G1 X124.126 Y100.568 E39.92749
G1 X124.126 Y101.156 E39.96448
G1 X101.156 Y124.126 E42.00814
G1 X101.744 Y124.126 E42.04513
G1 X124.126 Y101.744 E44.03649
G1 X124.126 Y102.332 E44.07348
G1 X102.332 Y124.126 E46.01253
G1 X102.920 Y124.126 E46.04952
G1 X124.126 Y102.920 E47.93625
G1 X124.126 Y103.508 E47.97324
G1 X103.508 Y124.126 E49.80767
G1 X104.096 Y124.126 E49.84466
G1 X124.126 Y104.096 E51.62677
G1 X124.126 Y104.684 E51.66376
G1 X104.684 Y124.126 E53.39357
G1 X105.272 Y124.126 E53.43055
G1 X124.126 Y105.272 E55.10805
G1 X124.126 Y105.860 E55.14504
G1 X105.860 Y124.126 E56.77022
G1 X106.448 Y124.126 E56.80721
G1 X124.126 Y106.448 E58.38009
G1 X124.126 Y107.036 E58.41707
G1 X107.036 Y124.126 E59.93764
G1 X107.624 Y124.126 E59.97463
G1 X124.126 Y107.624 E61.44288
G1 X124.126 Y108.211 E61.47987
G1 X108.211 Y124.126 E62.89581
G1 X108.799 Y124.126 E62.93280
G1 X124.126 Y108.799 E64.29643
G1 X124.126 Y109.387 E64.33342
G1 X109.387 Y124.126 E65.64474
G1 X109.975 Y124.126 E65.68173
G1 X124.126 Y109.975 E66.94074
G1 X124.126 Y110.563 E66.97773
G1 X110.563 Y124.126 E68.18443
G1 X111.151 Y124.126 E68.22142
G1 X124.126 Y111.151 E69.37581
G1 X124.126 Y111.739 E69.41280
G1 X111.739 Y124.126 E70.51488
G1 X112.327 Y124.126 E70.55187
G1 X124.126 Y112.327 E71.60164
G1 X124.126 Y112.915 E71.63862
G1 X112.915 Y124.126 E72.63608
G1 X113.503 Y124.126 E72.67307
G1 X124.126 Y113.503 E73.61822
G1 X124.126 Y114.091 E73.65521
G1 X114.091 Y124.126 E74.54805
G1 X114.679 Y124.126 E74.58503
G1 X124.126 Y114.679 E75.42556
G1 X124.126 Y115.267 E75.46255
G1 X115.267 Y124.126 E76.25077
G1 X115.855 Y124.126 E76.28776
G1 X124.126 Y115.855 E77.02366
G1 X124.126 Y116.443 E77.06065
G1 X116.443 Y124.126 E77.74425
G1 X117.031 Y124.126 E77.78123
G1 X124.126 Y117.031 E78.41252
G1 X124.126 Y117.619 E78.44951
G1 X117.619 Y124.126 E79.02848
G1 X118.207 Y124.126 E79.06547
G1 X124.126 Y118.207 E79.59214
G1 X124.126 Y118.795 E79.62912
G1 X118.795 Y124.126 E80.10348
G1 X119.383 Y124.126 E80.14047
G1 X124.126 Y119.383 E80.56251
G1 X124.126 Y119.971 E80.59950
G1 X119.971 Y124.126 E80.96923
G1 X120.559 Y124.126 E81.00622
G1 X124.126 Y120.559 E81.32364
G1 X124.126 Y121.147 E81.36063
G1 X121.147 Y124.126 E81.62574
G1 X121.735 Y124.126 E81.66273
G1 X124.126 Y121.735 E81.87553
G1 X124.126 Y122.323 E81.91252
G1 X122.323 Y124.126 E82.07301
G1 X122.911 Y124.126 E82.11000
G1 X124.126 Y122.911 E82.21818
G1 X124.126 Y123.499 E82.25517
G1 X123.499 Y124.126 E82.31104
G1 X124.086 Y124.126 E82.34803
G1 X124.126 Y124.086 E82.35159
G1 X99.954 Y113.570 F7500.000
G1 X118.052 Y95.471 E83.96181 F2700.000
G1 X117.718 Y95.217 E83.98820
G1 X99.954 Y112.982 E85.56870
G1 X99.974 Y112.374 E85.60697
G1 X117.435 Y94.912 E87.16049
G1 X117.190 Y94.570 E87.18701
G1 X99.974 Y111.786 E88.71870
G1 X99.974 Y111.198 E88.75569
G1 X116.952 Y94.220 E90.26622
G1 X116.714 Y93.870 E90.29285
G1 X115.771 Y94.812 E90.37671
G1 X115.107 Y95.476 F7500.000
G1 X99.974 Y110.610 E91.72311 F2700.000
G1 X99.974 Y110.022 E91.76010
G1 X114.089 Y95.906 E93.01597
G1 X113.563 Y95.844 E93.04931
G1 X99.974 Y109.434 E94.25834
G1 X99.974 Y108.846 E94.29533
G1 X113.116 Y95.704 E95.46458
G1 X112.716 Y95.515 E95.49237
G1 X99.974 Y108.258 E96.62609
G1 X99.974 Y107.670 E96.66308
G1 X112.317 Y95.327 E97.76126
G1 X111.951 Y95.105 E97.78820
G1 X99.974 Y107.082 E98.85379
G1 X99.974 Y106.494 E98.89078
G1 X111.592 Y94.875 E99.92451
G1 X111.234 Y94.645 E99.95128
G1 X99.974 Y105.906 E100.95314
G1 X99.964 Y105.327 E100.98955
G1 X110.876 Y94.416 E101.96037
G1 X110.518 Y94.186 E101.98714
G1 X99.986 Y104.717 E102.92412
G1 X99.994 Y104.121 E102.96162
G1 X110.160 Y93.956 E103.86602
G1 X109.779 Y93.749 E103.89330
G1 X99.899 Y103.629 E104.77233
G1 X99.711 Y103.229 E104.80016
G1 X109.385 Y93.554 E105.66086
G1 F900.000 E104.16086
G92 E0
G1 X111.409 Y91.531 F7500.000
G1 E1.50000 F900.000
G1 X124.126 Y78.813 E2.63143 F2700.000
G1 X124.126 Y78.225 E2.66842
G1 X111.113 Y91.239 E3.82623
G1 X110.887 Y90.877 E3.85307
G1 X124.126 Y77.637 E5.03100
G1 X124.126 Y77.049 E5.06799
G1 X110.661 Y90.515 E6.26603
G1 X110.435 Y90.153 E6.29287
G1 X124.126 Y76.461 E7.51103
G1 X124.106 Y75.894 E7.54678
G1 X110.180 Y89.820 E8.78579
G1 X109.898 Y89.514 E8.81197
G1 X123.539 Y75.874 E10.02553
G1 X122.951 Y75.874 E10.06252
G1 X109.545 Y89.279 E11.25516
G1 X109.091 Y89.145 E11.28495
G1 X122.363 Y75.874 E12.46570
G1 X121.775 Y75.874 E12.50269
G1 X108.342 Y89.307 E13.69782
G1 X107.412 Y90.236 F7500.000
G1 X106.338 Y91.310 E13.79339 F2700.000
G1 X106.097 Y90.963 E13.81996
G1 X121.187 Y75.874 E15.16246
G1 X120.599 Y75.874 E15.19945
G1 X105.857 Y90.615 E16.51098
G1 X105.613 Y90.272 E16.53750
G1 X120.011 Y75.874 E17.81848
G1 X119.423 Y75.874 E17.85547
G1 X105.359 Y89.937 E19.10667
G1 X105.058 Y89.650 E19.13284
G1 X118.835 Y75.874 E20.35851
G1 X118.247 Y75.874 E20.39549
G1 X104.743 Y89.377 E21.59688
G1 X104.321 Y89.212 E21.62543
G1 X117.659 Y75.874 E22.81211
G1 X117.071 Y75.874 E22.84910
G1 X103.754 Y89.191 E24.03394
G1 X101.684 Y91.261 F7500.000
G1 X101.484 Y91.460 E24.05170 F2700.000
G1 X101.217 Y91.139 E24.07797
G1 X116.483 Y75.874 E25.43613
G1 X115.895 Y75.874 E25.47312
G1 X100.978 Y90.791 E26.80031
G1 X100.738 Y90.443 E26.82690
G1 X115.307 Y75.874 E28.12312
G1 X114.719 Y75.874 E28.16011
G1 X100.486 Y90.106 E29.42636
G1 X100.211 Y89.794 E29.45257
G1 X114.131 Y75.874 E30.69106
G1 X113.543 Y75.874 E30.72805
G1 X99.908 Y89.509 E31.94119
G1 X99.552 Y89.277 E31.96791
G1 X112.955 Y75.874 E33.16038
G1 X112.367 Y75.874 E33.19737
G1 X99.093 Y89.148 E34.37840
G1 X98.349 Y89.304 E34.42620
G1 X111.779 Y75.874 E35.62109
G1 X111.191 Y75.874 E35.65808
G1 X96.013 Y91.052 E37.00850
G1 X96.292 Y91.361 E37.03469
G1 X97.402 Y90.250 E37.13352
G1 X95.747 Y90.730 F7500.000
G1 X110.603 Y75.874 E38.45530 F2700.000
G1 X110.015 Y75.874 E38.49229
G1 X95.483 Y90.406 E39.78523
G1 X95.223 Y90.078 E39.81156
G1 X109.427 Y75.874 E41.07533
G1 X108.839 Y75.874 E41.11232
G1 X94.963 Y89.750 E42.34692
G1 X94.703 Y89.422 E42.37325
G1 X108.251 Y75.874 E43.57867
G1 X107.664 Y75.874 E43.61566
G1 X94.443 Y89.094 E44.79192
G1 X93.655 Y89.294 E44.84304
G1 X107.076 Y75.874 E46.03707
G1 X106.488 Y75.874 E46.07405
G1 X92.144 Y90.217 E47.35018
G1 X92.020 Y89.753 E47.38039
G1 X105.900 Y75.874 E48.61526
G1 X105.312 Y75.874 E48.65225
G1 X91.820 Y89.365 E49.85261
G1 X91.526 Y89.071 E49.87876
G1 X104.724 Y75.874 E51.05297
G1 X104.136 Y75.874 E51.08996
G1 X91.232 Y88.777 E52.23801
G1 X90.938 Y88.483 E52.26416
G1 X103.548 Y75.874 E53.38606
G1 X102.960 Y75.874 E53.42305
G1 X90.610 Y88.224 E54.52184
G1 X90.146 Y88.100 E54.55204
G1 X102.372 Y75.874 E55.63978
G1 X101.784 Y75.874 E55.67677
G1 X89.682 Y87.975 E56.75345
G1 X89.218 Y87.851 E56.78366
G1 X101.196 Y75.874 E57.84930
G1 X100.608 Y75.874 E57.88629
G1 X88.575 Y87.906 E58.95685
G1 X87.772 Y88.121 E59.00913
G1 X100.020 Y75.874 E60.09880
G1 X99.432 Y75.874 E60.13578
G1 X85.577 Y89.729 E61.36848
G1 X85.245 Y89.473 E61.39486
G1 X98.844 Y75.874 E62.60479
G1 X98.256 Y75.874 E62.64178
G1 X84.951 Y89.179 E63.82555
G1 X84.657 Y88.885 E63.85170
G1 X97.668 Y75.874 E65.00929
G1 X97.080 Y75.874 E65.04628
G1 X84.310 Y88.643 E66.18239
G1 X83.847 Y88.519 E66.21260
G1 X96.492 Y75.874 E67.33768
G1 X95.904 Y75.874 E67.37467
G1 X83.383 Y88.395 E68.48870
G1 X82.859 Y88.330 E68.52187
G1 X95.316 Y75.874 E69.63014
G1 X94.728 Y75.874 E69.66713
G1 X82.057 Y88.545 E70.79451
G1 X80.345 Y90.257 F7500.000
G1 X80.255 Y90.346 E70.80251 F2700.000
G1 X80.051 Y89.963 E70.82985
G1 X94.140 Y75.874 E72.08337
G1 X93.552 Y75.874 E72.12036
G1 X79.757 Y89.669 E73.34770
G1 X79.464 Y89.374 E73.37385
G1 X92.964 Y75.874 E74.57501
G1 X92.376 Y75.874 E74.61200
G1 X79.150 Y89.100 E75.78876
G1 X78.686 Y88.976 E75.81898
G1 X91.789 Y75.874 E76.98470
G1 X91.201 Y75.874 E77.02169
G1 X78.222 Y88.852 E78.17639
G1 X77.581 Y88.905 E78.21682
G1 X90.613 Y75.874 E79.37619
G1 X90.025 Y75.874 E79.41318
G1 X75.874 Y90.025 E80.67219
G1 X75.874 Y89.437 E80.70918
G1 X89.437 Y75.874 E81.91588
G1 X88.849 Y75.874 E81.95287
G1 X75.874 Y88.849 E83.10726
G1 X75.874 Y88.261 E83.14425
G1 X88.261 Y75.874 E84.24633
G1 X87.673 Y75.874 E84.28332
G1 X75.874 Y87.673 E85.33309
G1 X75.874 Y87.085 E85.37008
G1 X87.085 Y75.874 E86.36753
G1 X86.497 Y75.874 E86.40452
G1 X75.874 Y86.497 E87.34967
G1 X75.874 Y85.909 E87.38666
G1 X85.909 Y75.874 E88.27950
G1 X85.321 Y75.874 E88.31649
G1 X75.874 Y85.321 E89.15701
G1 X75.874 Y84.733 E89.19400
G1 X84.733 Y75.874 E89.98222
G1 X84.145 Y75.874 E90.01921
G1 X75.874 Y84.145 E90.75511
G1 X75.874 Y83.557 E90.79210
G1 X83.557 Y75.874 E91.47570
G1 X82.969 Y75.874 E91.51269
G1 X75.874 Y82.969 E92.14397
G1 X75.874 Y82.381 E92.18096
G1 X82.381 Y75.874 E92.75993
G1 X81.793 Y75.874 E92.79692
G1 X75.874 Y81.793 E93.32359
G1 X75.874 Y81.205 E93.36058
G1 X81.205 Y75.874 E93.83493
G1 X80.617 Y75.874 E93.87192
G1 X75.874 Y80.617 E94.29396
G1 X75.874 Y80.029 E94.33095
G1 X80.029 Y75.874 E94.70068
G1 X79.441 Y75.874 E94.73767
G1 X75.874 Y79.441 E95.05509
G1 X75.874 Y78.853 E95.09208
G1 X78.853 Y75.874 E95.35719
G1 X78.265 Y75.874 E95.39418
G1 X75.874 Y78.265 E95.60698
G1 X75.874 Y77.677 E95.64397
G1 X77.677 Y75.874 E95.80446
G1 X77.089 Y75.874 E95.84145
G1 X75.874 Y77.089 E95.94963
G1 X75.874 Y76.501 E95.98662
G1 X76.501 Y75.874 E96.04249
G1 X75.914 Y75.874 E96.07948
G1 X75.874 Y75.914 E96.08304
G1 X75.880 Y92.370 F7500.000
G1 X76.174 Y92.664 E96.10919 F2700.000
G1 X75.874 Y92.964 E96.13595
G1 X75.874 Y93.552 E96.17294
G1 X76.468 Y92.958 E96.22586
G1 X76.762 Y93.252 E96.25201
G1 X75.874 Y94.140 E96.33109
G1 X75.874 Y94.728 E96.36808
G1 X77.207 Y93.395 E96.48669
G1 X77.671 Y93.519 E96.51690
G1 X75.874 Y95.316 E96.67679
G1 X75.874 Y95.904 E96.71378
G1 X78.233 Y93.545 E96.92369
G1 X79.035 Y93.330 E96.97594
G1 X75.874 Y96.492 E97.25724
G1 X75.874 Y97.080 E97.29423
G1 X80.443 Y92.510 E97.70080
G1 X80.130 Y92.235 E97.72700
G1 X80.279 Y92.086 E97.74026
G1 X80.685 Y92.857 E97.79504
G1 X75.874 Y97.668 E98.22308
G1 X75.874 Y98.256 E98.26007
G1 X80.979 Y93.151 E98.71427
G1 X81.273 Y93.445 E98.74042
G1 X75.874 Y98.844 E99.22078
G1 X75.874 Y99.432 E99.25777
G1 X81.579 Y93.727 E99.76533
G1 X82.042 Y93.851 E99.79554
G1 X75.874 Y100.020 E100.34439
G1 X75.874 Y100.608 E100.38137
G1 X82.506 Y93.975 E100.97149
G1 X82.970 Y94.099 E101.00170
G1 X75.874 Y101.196 E101.63308
G1 X75.874 Y101.784 E101.67007
G1 X83.751 Y93.906 E102.37093
G1 X85.574 Y92.672 F7500.000
G1 X75.874 Y102.372 E103.23395 F2700.000
G1 X75.874 Y102.960 E103.27094
G1 X86.024 Y92.810 E104.17398
G1 X86.283 Y93.138 E104.20031
G1 X75.874 Y103.548 E105.12643
G1 X75.874 Y104.136 E105.16342
G1 X86.577 Y93.432 E106.11570
G1 X86.871 Y93.726 E106.14185
G1 X75.874 Y104.724 E107.12028
G1 X75.874 Y105.312 E107.15727
G1 X87.165 Y94.020 E108.16186
G1 X87.553 Y94.220 E108.18932
G1 X75.874 Y105.900 E109.22844
G1 X75.874 Y106.488 E109.26543
G1 X88.017 Y94.344 E110.34581
G1 X88.481 Y94.468 E110.37602
G1 X75.874 Y107.076 E111.49767
G1 X75.874 Y107.664 E111.53466
G1 X88.945 Y94.592 E112.69759
G1 X89.707 Y94.418 E112.74679
G1 X75.874 Y108.251 E113.97755
G1 X75.874 Y108.839 E114.01454
G1 X90.510 Y94.203 E115.31673
G1 X92.003 Y92.710 F7500.000
G1 X93.469 Y91.244 E115.44713 F2700.000
G1 X93.636 Y91.664 E115.47560
G1 X75.874 Y109.427 E117.05595
G1 X75.874 Y110.015 E117.09294
G1 X93.817 Y92.072 E118.68936
G1 X93.998 Y92.479 E118.71739
G1 X75.874 Y110.603 E120.32987
G1 X75.874 Y111.191 E120.36686
G1 X94.178 Y92.887 E121.99539
G1 X94.359 Y93.294 E122.02343
G1 X75.874 Y111.779 E123.66802
G1 X75.874 Y112.367 E123.70501
G1 X94.539 Y93.702 E125.36567
G1 X94.740 Y94.088 E125.39309
G1 X75.874 Y112.955 E127.07166
G1 X75.874 Y113.543 E127.10865
G1 X94.954 Y94.463 E128.80618
G1 X95.167 Y94.838 E128.83331
G1 X75.874 Y114.131 E130.54981
G1 X75.874 Y114.719 E130.58680
G1 X95.415 Y95.178 E132.32536
G1 X95.684 Y95.496 E132.35161
G1 X75.874 Y115.307 E134.11415
G1 X75.874 Y115.895 E134.15114
G1 X96.006 Y95.762 E135.94234
G1 X96.451 Y95.906 E135.97173
G1 X75.874 Y116.483 E137.80248
G1 X75.874 Y117.071 E137.83947
G1 X97.045 Y95.900 E139.72304
G1 F900.000 E138.22304
G92 E0
G1 X102.971 Y97.029 F7500.000
G1 E1.50000 F900.000
G1 X105.053 Y94.947 E1.68528 F2700.000
G1 X104.036 Y94.200 F7500.000
G1 X104.368 Y93.868 E1.71482 F2700.000
G1 X103.695 Y95.129 F7500.000
G1 X104.597 Y94.227 E1.79506 F2700.000
G1 X104.825 Y94.587 E1.82186
G1 X103.353 Y96.059 E1.95280
G1 F900.000 E0.45280
G92 E0
G1 X112.197 Y91.331 F7500.000
G1 E1.50000 F900.000
G1 X124.126 Y79.401 E2.56137 F2700.000
G1 X124.126 Y79.989 E2.59836
G1 X113.930 Y90.186 E3.50557
G1 X115.233 Y89.471 F7500.000
G1 X124.126 Y80.577 E4.29681 F2700.000
G1 X124.126 Y81.165 E4.33380
G1 X116.088 Y89.204 E5.04901
G1 X116.704 Y89.175 E5.08785
G1 X124.126 Y81.753 E5.74819
G1 X124.126 Y82.341 E5.78518
G1 X117.220 Y89.247 E6.39963
G1 X117.635 Y89.421 E6.42790
G1 X124.126 Y82.929 E7.00548
G1 X124.126 Y83.517 E7.04247
G1 X118.034 Y89.609 E7.58447
G1 X118.421 Y89.810 E7.61190
G1 X124.126 Y84.105 E8.11949
G1 X124.126 Y84.693 E8.15648
G1 X118.776 Y90.044 E8.63253
G1 X119.125 Y90.282 E8.65915
G1 X124.126 Y85.281 E9.10412
G1 X124.126 Y85.869 E9.14111
G1 X119.466 Y90.529 E9.55572
G1 X119.808 Y90.776 E9.58221
G1 X124.126 Y86.457 E9.96645
G1 X124.126 Y87.045 E10.00344
G1 X120.149 Y91.022 E10.35732
G1 X120.508 Y91.252 E10.38410
G1 X124.126 Y87.633 E10.70606
G1 X124.126 Y88.221 E10.74305
G1 X120.908 Y91.439 E11.02940
G1 X121.313 Y91.622 E11.05735
G1 X124.126 Y88.809 E11.30768
G1 X124.126 Y89.397 E11.34467
G1 X122.019 Y91.504 E11.53219
G1 X123.368 Y90.743 F7500.000
G1 X124.126 Y89.985 E11.59963 F2700.000
G1 F900.000 E10.09963
G92 E0
G1 X93.327 Y90.798 F7500.000
G1 E1.50000 F900.000
G1 X92.218 Y91.907 E1.59870 F2700.000
G1 X92.392 Y91.145 E1.64790
G1 X93.186 Y90.351 E1.71850
G1 X93.045 Y89.905 E1.74796
G1 X92.268 Y90.681 E1.81703
G1 X90.439 Y103.682 F7500.000
G1 X85.701 Y108.419 E2.23851 F2700.000
G1 X86.448 Y108.260 F7500.000
G1 X90.313 Y104.395 E2.58239 F2700.000
G1 X90.187 Y105.109 E2.62798
G1 X87.194 Y108.102 E2.89426
G1 X87.941 Y107.943 E2.94227
G1 X90.062 Y105.823 E3.13095
G1 X89.936 Y106.536 E3.17654
G1 X88.687 Y107.785 E3.28763
G1 X89.434 Y107.626 E3.33564
G1 X89.810 Y107.250 E3.36912
G1 F900.000 E1.86912
G92 E0
G1 X98.180 Y124.092 F7500.000
G1 E1.50000 F900.000
G1 X99.899 Y124.092 E1.56319 F600.000
G1 X97.780 Y124.452 F7500.000
G1 X96.416 Y124.452 E1.61334 F600.000
G1 X95.860 Y124.200 F7500.000
G1 X95.860 Y121.063 E1.72865 F600.000
G1 X95.839 Y120.653 E1.74376
G1 X95.860 Y120.142 E1.76257
G1 X95.860 Y115.781 E1.92287
G1 X94.425 Y113.378 F7500.000
G1 X94.379 Y113.423 E1.92696 F2700.000
G1 X94.057 Y113.103 E1.95553
G1 X93.737 Y113.423 E1.98403
G1 X93.613 Y112.905 E2.01756
G1 X93.094 Y113.423 E2.06366
G1 X92.452 Y113.423 E2.10407
G1 X93.168 Y112.707 E2.16777
G1 X92.724 Y112.510 E2.19838
G1 X91.810 Y113.423 E2.27969
G1 X91.187 Y113.403 E2.31886
G1 X92.004 Y112.587 E2.39151
G1 F900.000 E0.89151
G92 E0
G1 X94.981 Y110.107 F7500.000
G1 E1.50000 F900.000
G1 X96.037 Y109.050 E1.59401 F2700.000
G1 X96.025 Y109.758 E1.63850
G1 X95.485 Y110.298 E1.68656
G1 X95.990 Y110.488 E1.72049
G1 X96.025 Y110.453 E1.72365
G1 X95.735 Y108.658 F7500.000
G1 X96.005 Y108.387 E1.74773 F2700.000
G1 F900.000 E0.24773
G92 E0
G1 X85.595 Y92.368 F7500.000
G1 E1.50000 F900.000
G1 X85.750 Y92.100 E1.51138 F600.000
G1 X85.750 Y91.790 E1.52277
G1 X85.750 Y90.610 F7500.000
G1 X85.750 Y90.301 E1.53413 F600.000
G1 X85.596 Y90.034 E1.54548
G1 F900.000 E0.04548
G92 E0
G1 Z1.100 F7500.000
G1 X79.526 Y91.887 F7500.000
G1 E1.50000 F900.000
G1 X79.481 Y92.055 E1.50527 F1680.000
G1 X78.855 Y92.681 E1.53206
G1 X78.000 Y92.910 E1.55887
G1 X77.145 Y92.681 E1.58567
G1 X76.519 Y92.055 E1.61246
G1 X76.290 Y91.200 E1.63926
G1 X76.519 Y90.346 E1.66603
G1 X77.144 Y89.719 E1.69284
G1 X78.000 Y89.490 E1.71964
G1 X78.710 Y89.680 E1.74188
G1 X78.856 Y89.719 E1.74645 F1680.000
G1 X79.481 Y90.346 E1.77326
G1 X79.710 Y91.200 E1.80003
G1 X79.542 Y91.829 E1.81974
G1 F900.000 E0.31974
G92 E0
G1 X78.707 Y89.529 F7500.000
G1 X80.491 Y91.629 F7500.000
G1 E1.50000 F900.000
G1 X80.376 Y91.200 E1.51345 F2400.000
G1 X80.727 Y89.889 E1.55453
G1 X81.687 Y88.927 E1.59567
G1 X83.000 Y88.576 E1.63680
G1 X84.032 Y88.852 E1.66913
G1 X84.313 Y88.927 E1.67792 F2400.000
G1 X85.273 Y89.889 E1.71906
G1 X85.624 Y91.200 E1.76014
G1 X85.273 Y92.512 E1.80127
G1 X84.312 Y93.473 E1.84238
G1 X83.000 Y93.824 E1.88350
G1 X81.688 Y93.473 E1.92463
G1 X80.727 Y92.512 E1.96574
G1 X80.506 Y91.687 E1.99160
G1 X80.877 Y91.526 F7500.000
G1 X80.790 Y91.200 E2.00181 F1680.000
G1 X81.086 Y90.096 E2.03641
G1 X81.894 Y89.286 E2.07106
G1 X82.072 Y89.238 E2.07660
G1 X83.000 Y88.990 E2.10569 F1680.000
G1 X84.106 Y89.286 E2.14033
G1 X84.914 Y90.096 E2.17497
G1 X85.210 Y91.200 E2.20958
G1 X84.914 Y92.305 E2.24422
G1 X84.105 Y93.114 E2.27884
G1 X83.000 Y93.410 E2.31347
G1 X81.895 Y93.114 E2.34811
G1 X81.086 Y92.305 E2.38273
G1 X80.893 Y91.584 E2.40534
G1 F900.000 E0.90534
G92 E0
G1 X82.043 Y88.839 F7500.000
G1 X85.876 Y91.200 F7500.000
G1 E1.50000 F900.000
G1 X86.294 Y89.639 E1.54892 F2400.000
G1 X87.437 Y88.494 E1.59789
G1 X89.000 Y88.076 E1.64685
G1 X90.250 Y88.411 E1.68601
G1 X90.562 Y88.494 E1.69578 F2400.000
G1 X91.706 Y89.638 E1.74476
G1 X92.124 Y91.200 E1.79369
G1 X91.706 Y92.763 E1.84265
G1 X90.561 Y93.906 E1.89162
G1 X89.000 Y94.324 E1.94054
G1 X87.437 Y93.906 E1.98950
G1 X86.294 Y92.763 E2.03844
G1 X85.891 Y91.258 E2.08558
G1 X86.290 Y91.200 F7500.000
G1 X86.653 Y89.846 E2.12802 F1680.000
G1 X87.644 Y88.853 E2.17050
G1 X87.853 Y88.797 E2.17702
G1 X89.000 Y88.490 E2.21297 F1680.000
G1 X90.355 Y88.853 E2.25541
G1 X91.347 Y89.845 E2.29791
G1 X91.710 Y91.200 E2.34035
G1 X91.347 Y92.556 E2.38282
G1 X90.354 Y93.547 E2.42529
G1 X89.000 Y93.910 E2.46773
G1 X87.644 Y93.547 E2.51020
G1 X86.653 Y92.556 E2.55266
G1 X86.305 Y91.258 E2.59331
G1 F900.000 E1.09331
G92 E0
G1 X87.824 Y88.398 F7500.000
G1 X96.949 Y105.307 F7500.000
G1 E1.50000 F900.000
G1 X96.708 Y104.765 E1.51795 F1680.000
G1 X96.659 Y104.336 E1.53104
G1 X96.742 Y103.809 E1.54716
G1 X96.856 Y103.571 E1.55516
G1 X97.014 Y103.375 E1.56278
G1 X97.211 Y103.220 E1.57039
G1 X97.452 Y103.107 E1.57844
G1 X97.990 Y103.025 E1.59491
G1 X98.417 Y103.073 E1.60792
G1 X98.770 Y103.219 E1.61947
G1 X99.039 Y103.436 E1.62993
G1 X99.216 Y103.698 E1.63949
G1 X99.310 Y104.009 E1.64931
G1 X99.339 Y104.372 E1.66035
G1 X99.314 Y104.679 E1.66966
G1 X99.237 Y104.940 E1.67791
G1 X99.104 Y105.160 E1.68567
G1 X98.921 Y105.340 E1.69344
G1 X98.694 Y105.475 E1.70144
G1 X98.247 Y105.624 E1.71569
G1 X98.067 Y105.028 E1.73454
G1 X97.820 Y105.037 E1.74201
G1 X97.605 Y106.001 E1.77191
G1 X99.300 Y106.001 E1.82320
G1 X99.300 Y107.082 E1.85592
G1 X97.642 Y107.082 E1.90610
G1 X97.642 Y107.562 E1.92063
G1 X99.300 Y107.562 E1.97081
G1 X99.300 Y108.645 E2.00359
G1 X99.078 Y108.645 E2.01032
G1 X99.017 Y108.886 E2.01786
G1 X99.300 Y109.040 E2.02761
G1 X99.300 Y112.020 E2.11781
G1 X98.883 Y112.020 E2.13045
G1 X98.835 Y112.283 E2.13853
G1 X99.280 Y112.451 E2.15293
G1 X99.280 Y113.871 E2.19592
G1 X97.415 Y114.564 E2.25615
G1 X97.462 Y114.827 E2.26425
G1 X97.580 Y114.827 E2.26782
G1 X97.580 Y115.547 E2.28961
G1 X99.299 Y115.547 E2.34164
G1 X99.299 Y116.652 E2.37509
G1 X97.580 Y116.652 E2.42712
G1 X97.580 Y117.159 E2.44246
G1 X99.299 Y117.159 E2.49449
G1 X99.299 Y119.485 E2.56489
G1 X98.898 Y119.485 E2.57703
G1 X99.189 Y119.883 E2.59196
G1 X99.278 Y120.110 E2.59935
G1 X99.339 Y120.649 E2.61574
G1 X99.312 Y120.992 E2.62618
G1 X99.227 Y121.283 E2.63536
G1 X99.079 Y121.525 E2.64392
G1 X98.873 Y121.711 E2.65233
G1 X98.625 Y121.827 E2.66062
G1 X98.357 Y121.865 E2.66879
G1 X98.125 Y121.835 E2.67588
G1 X97.911 Y121.744 E2.68291
G1 X97.662 Y121.530 E2.69285
G1 X97.643 Y121.851 E2.70256
G1 X97.580 Y121.832 E2.70454
G1 X97.580 Y122.278 E2.71804
G1 X99.299 Y122.278 E2.77007
G1 X99.299 Y123.384 E2.80354
G1 X97.580 Y123.384 E2.85557
G1 X97.580 Y124.103 E2.87733
G1 X96.616 Y124.103 E2.90651
G1 X96.616 Y121.559 E2.98351
G1 X96.828 Y121.559 E2.98991
G1 X96.622 Y121.084 E3.00557
G1 X96.577 Y120.651 E3.01874
G1 X96.602 Y120.295 E3.02955
G1 X96.681 Y120.007 E3.03859
G1 X96.816 Y119.779 E3.04660
G1 X97.175 Y119.451 E3.06133
G1 X96.616 Y119.451 E3.07826
G1 X96.616 Y114.860 E3.21722
G1 X95.467 Y115.287 E3.25431
G1 X95.467 Y113.781 E3.29987
G1 X97.070 Y113.286 E3.35065
G1 X97.070 Y113.050 E3.35778
G1 X95.467 Y112.549 E3.40863
G1 X95.467 Y111.011 E3.45519
G1 X98.358 Y112.103 E3.54873
G1 X98.358 Y110.958 E3.58337
G1 X96.699 Y110.958 E3.63358
G1 X96.699 Y109.877 E3.66630
G1 X96.984 Y109.877 E3.67493
G1 X96.758 Y109.437 E3.68991
G1 X96.699 Y108.906 E3.70607
G1 X96.699 Y105.307 E3.81501
G1 X96.889 Y105.307 E3.82076
G1 X96.661 Y105.029 F7500.000
G1 X92.679 Y107.710 F7500.000
G1 X96.118 Y107.225 E3.92589 F1680.000
G1 X93.794 Y109.807 E4.03102
G1 X95.318 Y112.927 E4.13614
G1 X92.145 Y111.515 E4.24128
G1 X89.647 Y113.928 E4.34641
G1 X90.010 Y110.473 E4.45155
G1 X86.942 Y108.844 E4.55668
G1 X90.341 Y108.122 E4.66183
G1 X90.943 Y104.700 E4.76700
G1 X92.649 Y107.658 E4.87033
G1 X92.960 Y107.426 F7500.000
G1 F900.000 E3.37033
G92 E0
G1 X85.403 Y117.708 F7500.000
G1 E1.50000 F900.000
G1 X85.403 Y121.991 E1.62966 F1680.000
G1 X81.693 Y124.134 E1.75933
G1 X77.982 Y121.991 E1.88902
G1 X77.982 Y117.707 E2.01869
G1 X81.693 Y115.566 E2.14837
G1 X85.351 Y117.678 E2.27620
G1 X85.797 Y117.777 F7500.000
G1 F900.000 E0.77620
G92 E0
G1 X95.503 Y115.700 F7500.000
G1 E1.50000 F900.000
G1 X96.216 Y115.435 E1.52302 F2400.000
G1 X96.216 Y119.851 E1.65667
G1 X96.309 Y119.851 E1.65950
G1 X96.206 Y120.228 E1.67132
G1 X96.176 Y120.658 E1.68439
G1 X96.216 Y121.045 E1.69615
G1 X96.216 Y124.400 E1.79770
G1 X95.503 Y124.400 E1.81928
G1 X95.503 Y115.760 E2.08079
G1 X95.376 Y113.391 F7500.000
G1 X95.067 Y113.486 E2.09057 F2400.000
G1 X95.067 Y113.697 E2.09695
G1 X90.461 Y113.697 E2.23635
G1 X92.229 Y111.990 E2.31073
G1 X95.321 Y113.367 E2.41318
G1 X95.067 Y110.432 F7500.000
G1 X95.067 Y110.937 E2.42846 F2400.000
G1 X94.819 Y110.994 E2.43616
G1 X94.272 Y109.874 E2.47390
G1 X96.299 Y107.623 E2.56559
G1 X96.299 Y108.928 E2.60511
G1 X96.360 Y109.477 E2.62182
G1 X96.299 Y109.477 E2.62367
G1 X96.299 Y110.897 E2.66666
G1 X95.123 Y110.453 E2.70471
G1 F900.000 E1.20471
G92 E0
G1 X97.654 Y104.517 F7500.000
G1 E1.50000 F900.000
G1 X97.596 Y104.449 E1.50270 F2400.000
G1 X97.575 Y104.357 E1.50554
G1 X97.600 Y104.249 E1.50889
G1 X97.672 Y104.172 E1.51210
G1 X97.780 Y104.130 E1.51562
G1 X97.990 Y104.110 E1.52201
G1 X98.248 Y104.133 E1.52983
G1 X98.398 Y104.199 E1.53479
G1 X98.424 Y104.336 E1.53902
G1 X98.404 Y104.464 E1.54293
G1 X98.297 Y104.531 E1.54675
G1 X97.943 Y104.645 E1.55802
G1 X97.709 Y104.541 E1.56577
G1 F900.000 E0.06577
G92 E0
G1 X99.700 Y105.601 F7500.000
G1 E1.50000 F900.000
G1 X99.306 Y105.601 E1.51194 F2400.000
G1 X99.606 Y105.103 E1.52955
G1 X99.709 Y104.752 E1.54060
G1 X99.740 Y104.373 E1.55214
G1 X99.705 Y103.934 E1.56545
G1 X99.581 Y103.525 E1.57840
G1 X99.337 Y103.163 E1.59161
G1 X98.976 Y102.872 E1.60564
G1 X98.518 Y102.682 E1.62064
G1 X97.983 Y102.622 E1.63696
G1 X97.335 Y102.720 E1.65677
G1 X97.000 Y102.877 E1.66796
G1 X96.731 Y103.088 E1.67833
G1 X96.515 Y103.356 E1.68876
G1 X96.356 Y103.690 E1.69993
G1 X96.256 Y104.327 E1.71946
G1 X96.321 Y104.907 E1.73713
G1 X96.299 Y104.907 E1.73780
G1 X96.299 Y106.796 E1.79497
G1 X92.890 Y107.276 E1.89916
G1 X90.740 Y103.547 E2.02944
G1 X89.994 Y107.787 E2.15974
G1 X85.783 Y108.681 E2.29003
G1 X89.584 Y110.700 E2.42029
G1 X89.134 Y114.980 E2.55055
G1 X90.298 Y113.855 E2.59955
G1 X90.298 Y124.400 E2.91873
G1 X82.506 Y124.400 E3.15455
G1 X82.443 Y124.163 E3.16198
G1 X85.803 Y122.222 E3.27943
G1 X85.803 Y117.477 E3.42307
G1 X81.693 Y115.104 E3.56670
G1 X77.582 Y117.476 E3.71035
G1 X77.582 Y122.222 E3.85400
G1 X80.943 Y124.163 E3.97146
G1 X80.879 Y124.400 E3.97889
G1 X75.600 Y124.400 E4.13868
G1 X75.600 Y91.245 E5.14216
G1 X75.878 Y91.209 E5.15066
G1 X76.160 Y92.262 E5.18367
G1 X76.938 Y93.040 E5.21695
G1 X78.000 Y93.324 E5.25024
G1 X79.062 Y93.040 E5.28352
G1 X79.840 Y92.262 E5.31681
G1 X80.124 Y91.200 E5.35010
G1 X79.840 Y90.139 E5.38334
G1 X79.063 Y89.360 E5.41665
G1 X78.000 Y89.076 E5.44994
G1 X76.937 Y89.360 E5.48324
G1 X76.160 Y90.139 E5.51654
G1 X75.878 Y91.191 E5.54951
G1 X75.600 Y91.154 E5.55801
G1 X75.600 Y75.600 E6.02879
G1 X124.400 Y75.600 E7.50581
G1 X124.400 Y90.376 E7.95302
G1 X122.790 Y91.464 E8.01184
G1 X121.849 Y91.878 E8.04295
G1 X121.504 Y91.925 E8.05349
G1 X121.143 Y91.875 E8.06451
G1 X120.952 Y91.760 E8.07127
G1 X120.240 Y91.426 E8.09507
G1 X118.837 Y90.412 E8.14746
G1 X118.166 Y89.972 E8.17175
G1 X117.370 Y89.597 E8.19838
G1 X117.152 Y89.514 E8.20544
G1 X116.503 Y89.423 E8.22528
G1 X115.832 Y89.515 E8.24577
G1 X114.838 Y89.935 E8.27845
G1 X113.805 Y90.587 E8.31540
G1 X112.445 Y91.512 E8.36520
G1 X111.712 Y91.885 E8.39006
G1 X111.508 Y91.921 E8.39636
G1 X111.407 Y91.901 E8.39946
G1 X110.938 Y91.474 E8.41866
G1 X110.096 Y90.130 E8.46665
G1 X109.715 Y89.717 E8.48365
G1 X109.532 Y89.560 E8.49098
G1 X109.005 Y89.405 E8.50759
G1 X108.448 Y89.561 E8.52511
G1 X108.197 Y89.796 E8.53550
G1 X107.698 Y90.307 E8.55715
G1 X106.703 Y91.698 E8.60890
G1 X106.510 Y91.880 E8.61691
G1 X106.124 Y91.484 E8.63366
G1 X105.481 Y90.550 E8.66796
G1 X105.135 Y90.095 E8.68527
G1 X104.705 Y89.691 E8.70312
G1 X104.522 Y89.552 E8.71007
G1 X104.000 Y89.406 E8.72648
G1 X103.446 Y89.561 E8.74388
G1 X103.196 Y89.796 E8.75427
G1 X102.695 Y90.310 E8.77598
G1 X102.169 Y91.067 E8.80391
G1 X101.681 Y91.721 E8.82860
G1 X101.506 Y91.876 E8.83568
G1 X101.138 Y91.499 E8.85162
G1 X100.480 Y90.550 E8.88657
G1 X100.134 Y90.095 E8.90388
G1 X99.704 Y89.691 E8.92173
G1 X99.521 Y89.552 E8.92868
G1 X98.999 Y89.406 E8.94509
G1 X98.445 Y89.561 E8.96249
G1 X98.195 Y89.796 E8.97288
G1 X97.694 Y90.310 E8.99460
G1 X97.168 Y91.068 E9.02252
G1 X96.681 Y91.721 E9.04718
G1 X96.491 Y91.888 E9.05485
G1 X96.020 Y91.490 E9.07353
G1 X95.362 Y90.693 E9.10482
G1 X94.248 Y89.290 E9.15902
G1 X93.296 Y89.793 E9.19162
G1 X93.781 Y91.319 E9.24006
G1 X94.964 Y93.988 E9.32843
G1 X94.995 Y93.988 E9.32939
G1 X95.415 Y94.722 E9.35498
G1 X95.786 Y95.217 E9.37370
G1 X96.258 Y95.616 E9.39241
G1 X96.901 Y95.667 E9.41192
G1 X97.410 Y95.342 E9.43021
G1 X97.908 Y94.685 E9.45515
G1 X98.410 Y93.839 E9.48493
G1 X98.820 Y93.260 E9.50640
G1 X99.194 Y94.029 E9.53227
G1 X100.237 Y96.857 E9.62350
G1 X100.824 Y97.863 E9.65874
G1 X101.500 Y98.210 E9.68176
G1 X102.181 Y97.858 E9.70496
G1 X102.794 Y96.787 E9.74230
G1 X103.837 Y93.951 E9.83376
G1 X104.199 Y93.209 E9.85876
G1 X104.513 Y93.586 E9.87363
G1 X105.273 Y94.782 E9.91652
G1 X105.916 Y95.473 E9.94508
G1 X106.490 Y95.661 E9.96337
G1 X107.067 Y95.492 E9.98155
G1 X107.654 Y94.854 E10.00779
G1 X108.230 Y93.890 E10.04179
G1 X108.548 Y93.445 E10.05833
G1 X108.898 Y93.163 E10.07193
G1 X109.009 Y93.141 E10.07537
G1 X109.274 Y93.193 E10.08352
G1 X109.468 Y93.304 E10.09029
G1 X110.178 Y93.643 E10.11410
G1 X112.382 Y95.055 E10.19334
G1 X113.413 Y95.541 E10.22784
G1 X114.010 Y95.643 E10.24616
G1 X114.614 Y95.523 E10.26481
G1 X115.388 Y94.899 E10.29489
G1 X116.057 Y93.875 E10.33193
G1 X116.342 Y93.394 E10.34884
G1 X116.511 Y93.210 E10.35641
G1 X116.743 Y93.425 E10.36596
G1 X117.603 Y94.692 E10.41231
G1 X117.984 Y95.100 E10.42920
G1 X118.416 Y95.398 E10.44507
G1 X118.636 Y95.527 E10.45281
G1 X119.258 Y95.731 E10.47261
G1 X120.531 Y95.914 E10.51154
G1 X121.844 Y95.928 E10.55127
G1 X122.688 Y95.869 E10.57689
G1 X123.034 Y95.816 E10.58748
G1 X123.838 Y95.682 E10.61217
G1 X124.400 Y95.530 E10.62978
G1 X124.400 Y124.400 E11.50357
G1 X97.980 Y124.400 E12.30322
G1 X97.980 Y123.784 E12.32186
G1 X99.699 Y123.784 E12.37389
G1 X99.699 Y121.878 E12.43158
G1 X99.333 Y121.878 E12.44265
G1 X99.596 Y121.446 E12.45795
G1 X99.707 Y121.065 E12.46997
G1 X99.741 Y120.642 E12.48283
G1 X99.655 Y119.885 E12.50587
G1 X99.699 Y119.885 E12.50721
G1 X99.699 Y115.147 E12.65062
G1 X97.980 Y115.147 E12.70265
G1 X97.980 Y114.780 E12.71374
G1 X99.680 Y114.149 E12.76863
G1 X99.680 Y112.420 E12.82097
G1 X99.700 Y112.420 E12.82157
G1 X99.700 Y105.661 E13.02615
G1 X101.499 Y97.760 F7500.000
G1 X101.892 Y97.557 E13.03954 F1680.000
G1 X102.431 Y96.617 E13.07231
G1 X103.468 Y93.795 E13.16330
G1 X103.912 Y92.893 E13.19374
G1 X104.091 Y92.721 E13.20126
G1 X104.212 Y92.705 E13.20496
G1 X104.370 Y92.789 E13.21038
G1 X104.837 Y93.350 E13.23246
G1 X105.591 Y94.537 E13.27501
G1 X106.139 Y95.125 E13.29934
G1 X106.497 Y95.242 E13.31074
G1 X106.848 Y95.139 E13.32181
G1 X107.332 Y94.613 E13.34345
G1 X107.901 Y93.662 E13.37701
G1 X108.251 Y93.171 E13.39526
G1 X108.732 Y92.788 E13.41386
G1 X109.004 Y92.734 E13.42224
G1 X109.356 Y92.795 E13.43306
G1 X109.449 Y92.832 E13.43609
G1 X109.653 Y92.949 E13.44322
G1 X110.372 Y93.292 E13.46731
G1 X112.577 Y94.705 E13.54659
G1 X113.531 Y95.156 E13.57852
G1 X114.004 Y95.236 E13.59304
G1 X114.439 Y95.150 E13.60648
G1 X115.086 Y94.628 E13.63162
G1 X115.718 Y93.662 E13.66658
G1 X116.020 Y93.154 E13.68445
G1 X116.369 Y92.778 E13.69997
G1 X116.507 Y92.738 E13.70432
G1 X116.657 Y92.775 E13.70901
G1 X116.736 Y92.873 E13.71283
G1 X117.048 Y93.163 E13.72572
G1 X117.913 Y94.436 E13.77230
G1 X118.250 Y94.797 E13.78725
G1 X118.794 Y95.156 E13.80697
G1 X119.353 Y95.340 E13.82477
G1 X120.558 Y95.514 E13.86162
G1 X121.835 Y95.527 E13.90027
G1 X122.643 Y95.471 E13.92481
G1 X123.754 Y95.291 E13.95887
G1 X124.800 Y95.004 E13.99170
G1 X124.800 Y124.800 E14.89353
G1 X95.103 Y124.800 E15.79236
G1 X95.103 Y114.097 E16.11631
G1 X90.698 Y114.097 E16.24963
G1 X90.698 Y124.800 E16.57358
G1 X75.200 Y124.800 E17.04265
G1 X75.200 Y75.200 E18.54388
G1 X124.800 Y75.200 E20.04511
G1 X124.800 Y90.588 E20.51087
G1 X122.984 Y91.815 E20.57720
G1 X121.959 Y92.267 E20.61110
G1 X121.503 Y92.329 E20.62502
G1 X121.053 Y92.266 E20.63878
G1 X120.036 Y91.772 E20.67299
G1 X118.614 Y90.744 E20.72612
G1 X117.967 Y90.320 E20.74951
G1 X117.052 Y89.904 E20.77995
G1 X116.502 Y89.827 E20.79674
G1 X115.937 Y89.904 E20.81400
G1 X115.026 Y90.289 E20.84395
G1 X114.023 Y90.923 E20.87985
G1 X112.651 Y91.856 E20.93009
G1 X111.837 Y92.269 E20.95770
G1 X111.503 Y92.328 E20.96796
G1 X111.236 Y92.274 E20.97619
G1 X110.630 Y91.735 E21.00075
G1 X109.776 Y90.373 E21.04941
G1 X109.337 Y89.919 E21.06853
G1 X109.002 Y89.821 E21.07907
G1 X108.650 Y89.920 E21.09015
G1 X108.477 Y90.081 E21.09731
G1 X108.005 Y90.565 E21.11778
G1 X107.006 Y91.962 E21.16974
G1 X106.652 Y92.281 E21.18417
G1 X106.500 Y92.323 E21.18895
G1 X106.351 Y92.282 E21.19362
G1 X105.813 Y91.738 E21.21676
G1 X105.160 Y90.790 E21.25161
G1 X104.834 Y90.361 E21.26793
G1 X104.341 Y89.917 E21.28802
G1 X104.000 Y89.821 E21.29873
G1 X103.649 Y89.920 E21.30976
G1 X103.476 Y90.082 E21.31692
G1 X103.004 Y90.566 E21.33741
G1 X102.494 Y91.300 E21.36444
G1 X101.976 Y91.994 E21.39067
G1 X101.651 Y92.281 E21.40378
G1 X101.499 Y92.323 E21.40857
G1 X101.350 Y92.282 E21.41324
G1 X100.812 Y91.738 E21.43638
G1 X100.159 Y90.790 E21.47123
G1 X99.833 Y90.361 E21.48754
G1 X99.340 Y89.917 E21.50764
G1 X98.999 Y89.821 E21.51834
G1 X98.648 Y89.920 E21.52938
G1 X98.475 Y90.082 E21.53654
G1 X98.003 Y90.566 E21.55703
G1 X97.494 Y91.300 E21.58404
G1 X96.976 Y91.994 E21.61027
G1 X96.650 Y92.281 E21.62340
G1 X96.500 Y92.323 E21.62813
G1 X96.322 Y92.269 E21.63374
G1 X95.733 Y91.771 E21.65709
G1 X94.142 Y89.798 E21.73380
G1 X93.776 Y89.992 E21.74634
G1 X94.154 Y91.172 E21.78385
G1 X95.224 Y93.588 E21.86382
G1 X95.750 Y94.502 E21.89574
G1 X96.079 Y94.941 E21.91233
G1 X96.418 Y95.227 E21.92577
G1 X96.799 Y95.258 E21.93733
G1 X97.136 Y95.043 E21.94943
G1 X97.574 Y94.464 E21.97140
G1 X98.075 Y93.619 E22.00112
G1 X98.640 Y92.818 E22.03081
G1 X98.799 Y92.716 E22.03653
G1 X98.912 Y92.725 E22.03994
G1 X99.085 Y92.891 E22.04721
G1 X99.563 Y93.873 E22.08026
G1 X100.601 Y96.687 E22.17103
G1 X101.107 Y97.558 E22.20153
G1 X101.446 Y97.733 E22.21308
G1 X101.752 Y98.070 F7500.000
G1 F900.000 E20.71308
G92 E0
G1 X94.101 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X94.101 Y114.297 E1.82394 F1680.000
G1 F900.000 E0.32394
G92 E0
G1 X93.051 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X93.051 Y114.297 E1.82394 F1680.000
G1 F900.000 E0.32394
G92 E0
G1 X92.101 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X92.101 Y114.297 E1.82394 F1680.000
G1 F900.000 E0.32394
G92 E0
G1 X91.301 Y125.000 F7500.000
G1 E1.50000 F900.000
G1 X91.301 Y114.297 E1.82394 F1680.000
G1 F900.000 E0.32394
G92 E0
G1 X97.725 Y121.274 F7500.000
G1 E1.50000 F900.000
G1 X97.593 Y121.071 E1.50735 F1680.000
G1 X97.576 Y120.928 E1.51173
G1 X97.526 Y120.829 E1.51506
G1 X97.418 Y120.712 E1.51988
G1 X97.374 Y120.576 E1.52420
G1 X97.372 Y120.489 E1.52684
G1 X97.427 Y120.353 E1.53128
G1 X98.446 Y120.974 F7500.000
G1 X98.463 Y120.730 E1.53867 F1680.000
G1 X98.433 Y120.585 E1.54315
G1 X98.257 Y120.389 E1.55113
G1 X98.192 Y120.256 E1.55560
G1 X98.168 Y120.067 E1.56138
G1 X98.093 Y119.755 E1.57109
G1 X97.998 Y119.518 E1.57880
G1 X98.132 Y119.431 E1.58363
G1 X98.582 Y119.208
Reply
#6
then important part is this one:
G21 ; set units to millimeters
M107
M190 S105 ; wait for bed temperature to be reached
M104 S225 ; set temperature
G28 ; home all axes
G1 Z5 F5000 ; lift nozzle

M109 S225 ; wait for temperature to be reached
G90 ; use absolute coordinates
G92 E0
M82 ; use absolute distances for extrusion
G1 F900.000 E-1.50000
G92 E0


FYI: M107 is useless
I wonder why you have an empty line ?

I suggest you to connect to printer using repetier and use manual tab: http://www.repetier.com/documentation/re...l-control/
then enter each line in blue above one by one and see which one has no effect : M109 or M104 as I do not see anything obvious but the strange empty line
Reply
#7
well, nevermind. I just discovered that the extruder doesn't start heating until the bed is fully heated.

Nothing if broken here. Thank you very much Luc!
Reply
#8
read this : https://github.com/luc-github/Repetier-F...petier.ino
and study DAVINCI GCODE, it will help you to understand what you are doing and how to heat extruder and bed in same time or not and other change you may want to do like clean nozzle or low down the bed
Reply
#9
Here it is, the ctrlV 3d printer test. Overall, it did really well im my noob opinion, but has some Z axis wobble. Some settings tweaks will help i'm sure maybe some hardware tweaks, but really I have no idea. I'm a noob that just used some settings I got off youtube. :p

my first print with Repetier
http://kiloohm.com/wp-content/uploads/20...avinci.jpg

the model, if you want to print your own
http://www.thingiverse.com/thing:704409
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)