Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
G-code help
I want to create an end g-code for my printer that will shut everything down like usual but also drop the Z axis by 10mm to get the nozzle off of the print.
What do I use to get the bed to drop after a print?
M104 S0 ; turn off extruder
M140 S0 ; turn off Bed
G90 ; Absolute
G28 X0 Y0 ; home
M117 Down Bed
G1 Z200 ; Lower bed
M117 Cleaning
M100 ;Cleaning
M84 ; Disable motors
M117 Cooling
M190 S50 ; Bed (cooling)
M116 ; Wait for all temperatures
M140 S0 ; turn off Bed
M117 Pickup piece
M84 ; Disable motors
M117 Printer Ready
That's perfect thanks!!
Instead of lowerin the bed I simply call x and y to home. That way if I do something stupid like leave something under the bed.....nope, that never happened...(whistling.......)


Forum Jump:

Users browsing this thread: 1 Guest(s)