03-07-2015, 07:34 AM
Hi,
I'm trialing using a Pendo Pad (cant find a raspberry pi v2 locally) to run the printer and camera through a USB hub, but that connection wont recharge the pad at the same time. If I cut the red wire (or the black) on the battery can I run a wire in series which would be sourced from another powerbank. I would rather hack direct to the 240v pad charger but wouldn't know how. Thanks in appreciation.
David![[Image: photo1.jpg]](https://forum.voltivo.com/images/photo1.jpg)
I'm trialing using a Pendo Pad (cant find a raspberry pi v2 locally) to run the printer and camera through a USB hub, but that connection wont recharge the pad at the same time. If I cut the red wire (or the black) on the battery can I run a wire in series which would be sourced from another powerbank. I would rather hack direct to the 240v pad charger but wouldn't know how. Thanks in appreciation.
David
![[Image: photo1.jpg]](https://forum.voltivo.com/images/photo1.jpg)
![[Image: photo2.jpg]](https://forum.voltivo.com/images/photo2.jpg)