Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
print degradation after flashing chip?
#1
I have a old cart that I was playing with and have flashed several times. It was working great until I flashed it to set my bed temp up to 100c I dont know if I corrupted something or what but now whatever I do I cant get it to print good with that flashed cartridge in the machine. it seems as if the extrude rate got cut way down somehow. is there anything I can do? I will try and read the eeprom and post it here. thanks

does the dump look normal for a flashed cart?
here is the eeprom dump
00: 5A4152000034384580A9030080A90300 ZAR..48E........
10: D2005A00544847423030303100000000 ..Z.THGB0001....
20: 0000000034000000FFFFFFFFAA55AA55 ....4........U.U
30: 883355AA568D03000000001004ED00E0 .3U.V...........
40: 5A4152000034384580A9030080A90300 ZAR..48E........
50: D2005A00544847423030303100000000 ..Z.THGB0001....
60: 0000000034000000FFFFFFFFAA55AA55 ....4........U.U
70: 883355AA80A90300AA55AA55C7B00A00 .3U......U.U....
Reply
#2
I used simplify 3d to turn the extrusion multiplier up to 2.0 and it is printing as it should now. so I assume something is making the reset cartridge run filament at half speed.
Reply
#3
hello george,
firmare version? xyzware version, i read somewhere that later verison do checks on eprom cartrige and if find a resetted one almost stop extrusion
Reply
#4
Firmware 1.0.1 and the newest xyzware, im not sure on its version. I have blocked xyzware with the firewall.
Reply
#5
funny thing happened. I have been printing fine for around 15 hours and now all of the sudden the extrusion multiplier set at 2 is twice as much as it needs. so now the cartridge is working normal again.

here is the dump after the cart started working correctly again

00: 5A4152000034384580A9030080A90300 ZAR..48E........
10: D2005A00544847423030303100000000 ..Z.THGB0001....
20: 0000000034000000FFFFFFFFAA55AA55 ....4........U.U
30: 883355AA05D701000000001004ED00E0 .3U.............
40: 5A4152000034384580A9030080A90300 ZAR..48E........
50: D2005A00544847423030303100000000 ..Z.THGB0001....
60: 0000000034000000FFFFFFFFAA55AA55 ....4........U.U
70: 883355AA80A90300AA55AA55C7B00A00 .3U......U.U....
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)