Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DaVinci printer bricked, other threads not working

A few days ago I attempted to load Repetier onto my Davinci 1.0 and failed. I used a thread telling me to send a certain code to the printer, now when I connect it to the PC and turn it on, it repeatedly connects and disconnects, and the lights flash. Does anyone know how to fix this? I need to revery back to the original XYZ software and firmware
You probably need to go back to the original firmware. That will at least verify that it's just the failed Repetier load that is causing the problem. And you'll have a working printer again.
Look at this post to get back to original FW.
The only other thing it might be is that the printer is on the same virtual com port as another device, or there is another program or driver/s trying to use the com port.

Forum Jump:

Users browsing this thread: 1 Guest(s)