Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Replacement Y-Axis Bearing (Not Holder, but Bearing)
Hey all. I was replacing my bearing holder as it was cracked as in the other thread.

I applied to much pressure to the side of the bearing and the shielding fell off. I need to order a replacement, and from what I can make out the bearing part number is NMB R650 HH. I was hoping someone can confirm the part number, and if there is a source to purchase these bearings from.

Right now the printer is printing ok, but the bearing is starting to dry out due to lack of shielding. I need to get this part ordered in pretty short order.

Please Advise.
Could be NMB R-1650 HH

Trying to find a supplier of these bearings now. Difficult to find... Sad
I replaced the bearing holders in x and y axis with 3D printed versions. I used 625zz bearings. Cheap on Ebay or Amazon. Work perfectly.
Size is 5x16x5 mm
Wink Dear all
This is Andy from Shanghai Yiqiang Industrial Co.,Ltd a bearing factory.
Our company can produce various bearings with superior quality and reasonable price.
We also sell famous brands bearings such as TIMKEN,KOYO, NSK, NTN, INA, FAG, SKF, IKO, NACHI and so on.
Wish to have chance to cooperation.
Best Regards

Promotion for Famous Brands Bearings

andy Wong(Sales manager)
Mop:86-18521308006 Email:[email protected]
TEL:+86-21-60543247 FAX: +86-21-52907987
ADD:1201 room of 12 floor,18th Building, Putuo district Changde Road No.1258.Shanghai,China[Image: 544862.jpg]

Forum Jump:

Users browsing this thread: 1 Guest(s)