Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Eprom Read
#1
Please post only NEW CARTRIDGE eprom reads to this thread. If you have a question, please start another thread.

Kieth
Reply
#2
GREEN
00: 5A4147000034325380A9030080A90300 ZAG..42S........
10: D2005A00544847423030353900000000 ..Z.THGB0059....
20: 00000000340000005A415700AA55AA55 ....4...ZAW..U.U
30: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
40: 5A4147000034325380A9030080A90300 ZAG..42S........
50: D2005A00544847423030353900000000 ..Z.THGB0059....
60: 00000000340000005A415700AA55AA55 ....4...ZAW..U.U
70: 883355AA80A90300AA55AA5507830A00 .3U......U.U....



BLUE
00: 5A4142000034324B80A9030080A90300 ZAB..42K........
10: D2005A00544855533031303900000000 ..Z.THUS0109....
20: 000000003400000001010101AA55AA55 ....4........U.U
30: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
40: 5A4142000034324B80A9030080A90300 ZAB..42K........
50: D2005A00544855533031303900000000 ..Z.THUS0109....
60: 000000003400000001010101AA55AA55 ....4........U.U
70: 883355AA80A90300AA55AA5507830A00 .3U......U.U....


YELLOW
00: 5A4159000034333480A9030080A90300 ZAY..434........
10: D2005A00544847423030323800000000 ..Z.THGB0028....
20: 00000000340000005A415700AA55AA55 ....4...ZAW..U.U
30: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
40: 5A4159000034333480A9030080A90300 ZAY..434........
50: D2005A00544847423030323800000000 ..Z.THGB0028....
60: 00000000340000005A415700AA55AA55 ....4...ZAW..U.U
70: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
Reply
#3
Thanks for the effort Kieth.

Could you post a quick how-to showing us how we can easily dump the EEPROM too?
This should probably include hardware and software used, and step by step instructions, to make it noob friendly.

It would be great to start making a database of dumps, so we can check any changes in the cartridges.
I should be getting a yellow, red and a white cartridge in about 8 days.

Cheers
Reply
#4
I started a new thread for how to/what to do with the dumps. Unfortunately its waiting for moderator. Strange...

Kieth
Reply
#5
Sometimes i smarter than dumb I think I am.

I attempted to post the info to the filament forum. Sorry Oliver!

Smile

Kieth
Reply
#6
WHITE
00: 5A4157000034333480A9030080A90300 ZAW..434........
10: D2005A00544847423031353200000000 ..Z.THGB0152....
20: 00000000340000005A415700AA55AA55 ....4...ZAW..U.U
30: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
40: 5A4157000034333480A9030080A90300 ZAW..434........
50: D2005A00544847423031353200000000 ..Z.THGB0152....
60: 00000000340000005A415700AA55AA55 ....4...ZAW..U.U
70: 883355AA80A90300AA55AA5507830A00 .3U......U.U....


BLACK
00: 5A414B000034324880A9030080A90300 ZAK..42H........
10: D2005A00415355533031313800000000 ..Z.ASUS0118....
20: 000000003400000001010101AA55AA55 ....4........U.U
30: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
40: 5A414B000034324880A9030080A90300 ZAK..42H........
50: D2005A00415355533031313800000000 ..Z.ASUS0118....
60: 000000003400000001010101AA55AA55 ....4........U.U
70: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
Reply
#7
Stock 300gr ABS White - Unused, Unconnected, Purchased Sealed from EBay

00: 5A41570000343236C0D40100C0D40100 ZAW..426........
10: D2005A00544845553032373200000000 ..Z.THEU0272....
20: 000000003400000001010101AA55AA55 ....4........U.U
30: 883355AAC0D40100AA55AA5507830A00 .3U......U.U....
40: 5A41570000343236C0D40100C0D40100 ZAW..426........
50: D2005A00544845553032373200000000 ..Z.THEU0272....
60: 000000003400000001010101AA55AA55 ....4........U.U
70: 883355AAC0D40100AA55AA5507830A00 .3U......U.U....

SERIAL No: 3DP01-FEU-A3W-TH-426-0272
Reply
#8
Red ABS, 600gr, Unconnected - Purchased sealed from EBay

00: 5A4152000034324D80A9030080A90300 ZAR..42M........
10: D2005A00544847423030343100000000 ..Z.THGB0041....
20: 000000003400000001010101AA55AA55 ....4........U.U
30: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
40: 5A4152000034324D80A9030080A90300 ZAR..42M........
50: D2005A00544847423030343100000000 ..Z.THGB0041....
60: 000000003400000001010101AA55AA55 ....4........U.U
70: 883355AA80A90300AA55AA5507830A00 .3U......U.U....

SERIAL: 3DP01-FGB-A6R-TH-42M-0041

NOTE: I think it would also be important to include the Serial number, to see if there is some correlation with the EEproms
Reply
#9
Yellow ABS, 600gr, Unused/Unconnected - Purchased sealed from EBay

00: 5A4159000034324C80A9030080A90300 ZAY..42L........
10: D2005A00544847423030363100000000 ..Z.THGB0061....
20: 000000003400000001010101AA55AA55 ....4........U.U
30: 883355AA80A90300AA55AA5507830A00 .3U......U.U....
40: 5A4159000034324C80A9030080A90300 ZAY..42L........
50: D2005A00544847423030363100000000 ..Z.THGB0061....
60: 000000003400000001010101AA55AA55 ....4........U.U
70: 883355AA80A90300AA55AA5507830A00 .3U......U.U....

SERIAL No: 3DP01-FGB-A6Y-TH-42L-0061
Reply
#10
On that serial, looks like the last 4 are straight into the eeprom.

Kieth
Reply
#11
I'm guessing all serials (at least the last 4 characters) are in the filaments roms.

Have you checked with your serial numbers?
Reply
#12
Just glanced. Yes, it is always the case. I have several cartridges here.

So, is it worth uploading more dumps of the same colors? (I have a couple whites, another blue, etc.)

Kieth
Reply
#13
I think it'd be worth it, if only for completeness. At least then we can try compare different versions of the same colors.

Whenever I get new ones in, I'll post them along with the serials also.
Reply
#14
Stock 300gr White, Used, +- 10M left

00: 5A41570000343236C0D40100C0D40100 ZAW..426........
10: D2005A00544845553032373200000000 ..Z.THEU0272....
20: 000000003400000001010101AA55AA55 ....4........U.U
30: 883355AA34290000BD820A00A0730720 .3U.4).......s.
40: 5A41570000343236C0D40100C0D40100 ZAW..426........
50: D2005A00544845553032373200000000 ..Z.THEU0272....
60: 000000003400000001010101AA55AA55 ....4........U.U
70: 883355AAC0D40100AA55AA5507830A00 .3U......U.U....



And here is the dump of the same cartridge full, unused:
00: 5A41570000343236C0D40100C0D40100 ZAW..426........
10: D2005A00544845553032373200000000 ..Z.THEU0272....
20: 000000003400000001010101AA55AA55 ....4........U.U
30: 883355AAC0D40100AA55AA5507830A00 .3U......U.U....
40: 5A41570000343236C0D40100C0D40100 ZAW..426........
50: D2005A00544845553032373200000000 ..Z.THEU0272....
60: 000000003400000001010101AA55AA55 ....4........U.U
70: 883355AAC0D40100AA55AA5507830A00 .3U......U.U....
Reply
#15
Just a thought, but it might be worth documenting which firmware and xyz version you have in regards to the used cartridge dumps.

Kieth
Reply
#16
THAAXXXX

AA = market stock allocation. Eg US GB EU etc. it's not unusual to see GB cartridges in USA. I have some. I guess they mixed stocks
XXXX = cartridge ID aka serial.

Increment in those 4 bytes is sufficient to fool ver J (for now)
Reply
#17
well its very nice sharing good work here i like it
Reply
#18
good evening ...
I reset the cartridge chip filament Da Vinci 1 through arduino as explained in your guide. The cartridge is seen and recognized, but when I print, I get an error:

Cardridge 1 Error
Please remove cardridge and install again.
If errors exist, please contact service center for support.
ERROR CODE: 0008

I had the firmware 1.1.J and I downgraded to 1.1.I but the mistake remains.

What do you think is not working?

Thanks to all
Reply
#19
Try downgrading to G firmware.
Reply
#20
OK. I solved ...
Now is also working with the firmaware 1.1.I
I'm printing two pieces of evidence, when the printer has finished, update the firmware to 1.1.J text as before and if it works with that.
The problem was in the code.

I had already downloaded this:https://github.com/voltivo/davinci_filament_reset_arduino/blob/master/xyz_dv_eprom.ino
that gave problems to the lack of character ";" at the end of the line 369 but that gave problems for the printer, error 008.

now I downloaded this:
https://github.com/voltivo/davinci_filam..._eprom.ino
and it works perfectly.

The difference lies in these instructions:
the row that contains 368 ...

pinMode (13, OUTPUT);

must be eliminated.

I will report if this code will work even on firmware 1.1.J
thanks to all
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)