Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help Please!
#1
Just purchased and flashed .92 onto my XYZ-DV 1.0:

Followed a few others pathways and got most of the settings in Slic3r and repetier host set up.  The problem is when I start a print through host.  

I am seeing the priming behavior at a perfect starting layer height. The printer returns the head to a cleaning position, the bed drops (Z axis lowers) and then it attempts to start the print with almost a whole centimeter space between the bed.  I am certain I have messed this up somehow, but IDK what to do to make the print start at the same layer height as the priming layer just seconds before.  

I am using this start g-code from Slic3r:


M140 S[first_layer_bed_temperature] ; Bed (no wait)

M106 S255 ; Start fan
G90 ; set absolute coordinates
G28 ; home all axis
M190 S[first_layer_bed_temperature] ; Bed (wait)
M104 S[first_layer_temperature] ; Extruder (no wait)
M109 S[first_layer_temperature] ; Extruder (wait)
M117 Start
M300 s1000 p400 ; Beep
M300 s1500 p400
M300 s2000 p400
M300 s2500 p400
M117 Cleaning
M100 ; Cleaning
G1 Z5 F1500
G1 X0 Y15 F1000
G1 X32 Y30 F1000
G92 E0 ; reset extrusion distance
G1 Z[first_layer_height] F4800.000
G1 X32 Y170 E14 F1000
G1 X32 Y185 F1000
M117 Printing
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)